Metra 87-99-3052 GM/Chevy Truck 1973-87 Dash Kit
Metra 87-99-3052 GM/Chevy Truck 1973-87 Dash Kit is rated out of 5 by 1.
Rated 5 out of 5
by Vic Vega
from Best DIN adapter...but could be betterTried more than one DIN adapter and this is the best one. The ABS cover plate could be 1/16th of an inch larger all the way around to allow for variations created when cutting the bezel and the dash panel, especially since you will be cutting both with less than a precision tool...by hand. As is, slight variations will cause the ABS cover to be slightly off center and not cover the bezel as well as it should, so plan to make slight adjustments to get it to line up and look right...keeping in mind there is not a lot of room for adjustments to begin with. Also, the ABS cover should be slightly curved like the dash to properly finish the install and eliminate the cover to bezel gap on both sides starting about half way down. Both problems keep the finished installation from looking as good as it should. This adapter works well with DIN installs that were not done well and need to be redone keeping in mind the above issues.
Date published: 2013-06-21