Metra 82-4300 1" Depth Extender Pair

Brand:|Model: 82-4300
Universal plastic spacer ring gives 1" extra depth. Works with most 5-1/4", 6" or 6-1/2" speakers.
In Stock
Your Price
Buy 4+$7.30
Part # 265-821

Product Details

Metra 82-4300 1" Depth Extender Pair
Universal plastic spacer ring gives 1" extra depth. Works with most 5-1/4", 6" or 6-1/2" speakers. Sold in pairs. Dimensions: OD 6-5/8", ID 5-7/16.

Metra 82-4300 1" Depth Extender Pair
  • BrandMetra
  • Model82-4300
  • Part Number265-821
  • UPC086429003129
  • Product CategorySpeaker Mounting Adapters
  • Unit of MeasureEA
  • Product Rating
    (10 Reviews)
  • Weight0.792 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.


Metra 82-4300 1" Depth Extender Pair
Metra 82-4300 1" Depth Extender Pair is rated 4.0 out of 5 by 10.
Rated 3 out of 5 by from Extenders not neededPurchased them but they are too big. I'll hold on to them and maybe if I have to remove the speakers in another vehicles they may fit them.
Date published: 2014-10-04
Rated 2 out of 5 by from Not Solid, But, HollowBeing plastic in itself is not the problem. The problem is that they have a hollow cross-section which makes it impossible to chamfer the top inside edge which you need to do if you use them to install 6.5" speakers. I ended up stacking Neoprene rings between the speaker frame and these spacers so as to allow clearance to the inside diameter which is too small for 6.5" speakers. Metra should have made these available in two sizes. One for 5 to 5.5" and one for 6 to 6.5" speakers or made them with a 0.25" wall thickness on the top surface.
Date published: 2009-04-01
Rated 5 out of 5 by from Fit Great on a VWI have a 2003 VW Jetta and the brackets fit on with no fuss and the holes matched up like they where stock. The hardware that came with it was easy to do as well. Had to drill a hole though for the wire to come out but its high grade plastic so it worked fine.
Date published: 2009-03-28
Rated 4 out of 5 by from High qualityThis product is great the only step better would be to use a wooden version of this spacer
Date published: 2009-02-21
Rated 5 out of 5 by from These are almost perfectThese work exactly for what I needed them for, but the way they want you to mount them to the door, then mount the speakers to them, for me doesnt work. I had to get all new, longer screws and just run the screw through the speaker and adapter and into the door. Works well though.
Date published: 2008-08-25
Rated 1 out of 5 by from Didn't fit my speakersTried to use them on some CDT 6.5". They will need to be cut down on the inner diameter to fit, not an easy thing with ABS plastic. I might as well use mdf now, since I have to break out the power tools.
Date published: 2008-07-24
  • 2015-10-12T07:08CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_265-821, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Metra 82-4300 1" Depth Extender Pair

Will it work as 6.75 down to 5.25 install adapter?

I have a 2009 Honda Fit sport w/Nav that has 6.75" factory speakers in the doors. I am considering replacing them with 5.25" speakers-some of the bravox buyout models-but I am not sure if the speakers will simply screw in or if I will need adapter rings for additional width. I understand these rings will work to extend depth but I am thinking since they are described as being for 5.25 or 6.5 that they would also work in my case, if necessary.
Asked by: spikington
The OD of these rings is 6-5/8" so this may not work for your vehicle. You may have to make custom fitted adapters to fit your application.
Answered by: MattP
Date published: 2013-05-20

external circle dimension

what's about external and internal circle diameter ?only one model ??
Asked by: alzin5342
Dimensions: OD (outside diameter) 6-5/8", ID (inside diameter) 5-7/16". We also carry a ring for 6x9 speakers, linked below for your convenience.
Answered by: RussR
Date published: 2011-08-31
  • 2015-10-12T07:52CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_265-821, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Get Sales Flyer
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1986-2015 Parts Express, All Rights Reserved

Live Chat Software