Magnepull XP1000-LC Wire Pulling System

Magnepull XP1000-LC Wire Pulling System

Brand:| Model: XP1000-LC
Overview
Stop fishing wire and cable through walls the old-fashioned way. Use the Magnepull magnetic wire pulling system and turn an ugly job into an easy one!
A restocked/refurbished, or Open Box unit of the product is available -- see it now
Highlights
  • Rare earth magnets pull wire through drywall
  • Reduces installation labor and wall marring
  • Rugged carrying case
Part # 
365-630
Weight: 3.8 lbs.  
IN STOCK
List Price$148.00
You Save15%
Your Price
$125.00
Part # 365-630
Qty:  EA
Available Payment Methods

Product Details

Magnepull XP1000-LC Wire Pulling System

Magnepull is a unique product that is changing the way wires are being installed in walls. Super strength rare earth magnets are used to magnetically couple a wire or pull line through the drywall, allowing the installer to have complete control. Simply attach the pulling device to the end of the cable and couple it through the drywall to the wire retrieval unit. Once coupled, the installer can move the wire retrieval unit onto the outside of the drywall to the desired location, and retrieve the wire or pull line.



Magnepull XP1000-LC Wire Pulling System
  • BrandMagnepull
  • ModelXP1000-LC
  • Part Number365-630
  • UPC799975125183
  • Product CategoryWire Pulling Kits
  • Unit of MeasureEA
  • Product Rating
    (8 Reviews)
  • Weight3.8 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Magnepull XP1000-LC Wire Pulling System
in the Wire Pulling Kits product category.

Reviews

Magnepull XP1000-LC Wire Pulling System
Magnepull XP1000-LC Wire Pulling System is rated 4.5 out of 5 by 8.
Rated 4 out of 5 by from Great ProductsI brought this two weeks ago. i did two work done with this Magnepull.
Date published: 2014-08-13
Rated 5 out of 5 by from great purchaseBought this to pull wires through a insulated wall and it works very well. Keep in mind that if you have metal studs the magnet will be attracted to them and make it difficult to pull. You have to keep every thing centered between the studs. Also if there is any thickness variation to the wall like a piece of plywood behind the sheet rock, the magnets stength is not enough for a solid hook up and might cause a problem. But, all that can be worked through with patience and desire. All in all it made my job way easier!
Date published: 2013-05-27
Rated 4 out of 5 by from It works.It does work, but I wasn't able to pop the magnet through a 1 1/8'' hole per the instructions. I had to pull it past the hole and hook the wire. Also, they tell you to drill a 3/4" hole 1/2" from the edge of the attic plate. Well when I drilled two holes that way, they ended up along the edge of the inside wall. I went back and drilled the center of the plates. It worked fine that way even with the fiberglass insulation. I was able to do the job by myself with this tool, but now I have to repair the ceiling and wall. I'd suggest try drilling through the center of the plate first. You can always pull the cable and magnet back up.
Date published: 2013-01-20
Rated 5 out of 5 by from NiceWorked great pulling coax through a cellulose insulated exterior wall. Have patience. It is way better than fishing.
Date published: 2012-02-20
Rated 5 out of 5 by from Fantastic productI needed to run communication wires in my 100 yo home..... plaster and lathe walls, 4" + of solid wood in places, but the Magnapull worked ! Better than I ever expected. I cannot recommend this tool enough.
Date published: 2011-09-28
Rated 4 out of 5 by from AwesomeWhen fishing wires to a small opening, nothing has been quicker or easier than Magnapull. I highly recommend it.
Date published: 2008-12-13

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Magnepull XP1000-LC Wire Pulling System

We wanna ask more about " cause cancer" of your product, We have some kids in the house, so Can we use "Magnepull"? How to use to not affect to the health? Thank you

Asked by: khoato

Does this work in insulated walls?

Asked by: mike35
Insulation will provide added resistance against the internal magnet/cable assembly. The shape of the internal magnet should slip easily through insulation provided that you take your time with the external magnet runner. To eliminate cable snags, it is recommended to wrap the eyelet and cable with duct tape.
Answered by: mikevv
Date published: 2014-01-12

Customer Projects

Customer projects that include: Magnepull XP1000-LC Wire Pulling System

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1