Microphone/Signal Cable 1 ft.

Low Noise Microphone Instrument Signal Cable Copper Braid 22 AWG 2C USA Sold per ft.

Overview
High quality, commercial grade microphone cable that's perfect for building your own! Features two 22 ga. center conductors (as opposed to 24 ga. found in many competitors' cables) for lower resistance and maximum signal transfer. Made in the USA.
Part # 
100-220
Weight: 0.0688 lbs.  
IN STOCK
List Price$0.99
You Save20%
Your Price
$0.79
Part # 100-220
Qty:  FT
Available Payment Methods

Product Details

Low Noise Microphone Instrument Signal Cable Copper Braid 22 AWG 2C USA Sold per ft.

High quality, commercial grade microphone and small-signal cable that's perfect for building your own! Also for making high quality low noise RCA patch cables. Features two 22 ga. center conductors (as opposed to 24 ga. found in many competitors' cables) for lower resistance and maximum signal transfer. Super durable, yet flexible midnight blue PVC outer jacket. Available in custom lengths, or buy it on spools and save.

Specifications: • Conductors: 2 x 22 ga. (65 x 40 ga.) • Insulation colors: Black and white • Shield: 92% coverage bare copper braid • Jacket: Midnight blue PVC, 6.4 mm (.252") O.D. • 100% satisfaction guaranteed • Made in the USA.



Product Specifications
  • Wire Gauge22 AWG
  • Jacket ColorMidnight Blue
  • LengthBy the Foot
Low Noise Microphone Instrument Signal Cable Copper Braid 22 AWG 2C USA Sold per ft.
  • BrandParts Express
  • Part Number100-220
  • UPC844632045417
  • Product CategoryMicrophone Cable & Signal Cable
  • Unit of MeasureFT
  • Product Rating
    (10 Reviews)
  • Weight0.0688 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Low Noise Microphone Instrument Signal Cable Copper Braid 22 AWG 2C USA Sold per ft.
in the Microphone Cable & Signal Cable product category.

Reviews

Low Noise Microphone Instrument Signal Cable Copper Braid 22 AWG 2C USA Sold per ft.
Low Noise Microphone Instrument Signal Cable Copper Braid 22 AWG 2C USA Sold per ft. is rated 4.6 out of 5 by 10.
Rated 4 out of 5 by from Good Cable- comparison to Dayton cableSeveral people have asked questions comparing this cable to the old Dayton Audio Lo Noise cable from PE. I have been using the old Dayton cable for many years and can attest to its quality. I liked the braided shield, even though it made the cable a bit stiffer than a spiral shield. The tinned shield made it corrosion resistant (eg. Boat wiring is all tinned copper). The new wire also has a tightly braided shield, but it is NOT tinned. The new cable has a slightly thicker outer jacket. This makes it more damage resistant but also makes it stiffer to handle than the old cable. According to my precision wire stripper, the conductors are closer to 24 AWG than to 22. The new cable (inner conductors) has fewer twists per foot, making it less resistant to hum.Detailed comparison:1)Old Dayton Lo Noise cable: 24 AWG, tinned, braided shield, 7 twists per foot2)New PE 100-220 : 24 AWG, braided shield, 5 twists per foot3)Competitive "3 letter" brand: 24 AWG, Spiral wrapped shield, 8 twists per footThe new cable is not quite as good as the old Dayton branded cable and a bit tougher to work with. It is a little less resistant to picking up Hum, but equally good at shielding from RF. Overall, it is still a quality cable and I have no hesitation using it for indoor cabling.
Date published: 2014-11-20
Rated 5 out of 5 by from great qualitybought it for an audio class and it works perfectly.
Date published: 2014-10-16
Rated 4 out of 5 by from Great value USA made.I love this stuff. I try to buy American made when I can so I like the fact that this stuff is available. I have made probably a dozen cords from this cable and it is easy to work with. I have had zero failures and the cords get used for a gigging band. The only minor complaint I have is the stiffness of the cable. It's not super flexible.
Date published: 2012-03-23
Rated 5 out of 5 by from good stufflooks like quality to me. i used alot of this to make my own interconnects, its alittle tight to fit into 6.3mm plug holes but you can squeeze it in.had no trouble with heat from soldering,.
Date published: 2011-08-26
Rated 5 out of 5 by from Very good value for your audio dollarWe use this cable to construct or repair certain cables we use in our operation. This cable always performs well and is very consistent in it's quality.Bravo to PE for providing the audio consumer with high quality products at reasonable prices backed by outstanding customer service.
Date published: 2011-04-20
Rated 5 out of 5 by from The Good StuffThis cable is among the best I have used. It is however a bit difficult to work with due to the very tightly braided shield (read that very high quality) so be patient and you will develop the required technique. This stuff is the best priced premium quality balanced mic cable I have found, and all of them have tight braided shielding so there is no getting around the difficulty in working with it. It is a developed skill, learn it or pay more for your cables and get less as this is The Good Stuff.
Date published: 2011-01-23

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Low Noise Microphone Instrument Signal Cable Copper Braid 22 AWG 2C USA Sold per ft.

Customer Projects

Customer projects that include: Low Noise Microphone Instrument Signal Cable Copper Braid 22 AWG 2C USA Sold per ft.

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software