free shipping at parts express

Manuals & Resources

Lanzar MAXP84 8" 800 Watt Subwoofer

Brand:|Model: MAXP84|Part # 292-2592
Lanzar's MAXP84 is a 8" high powered subwoofer with non-press paper cone and specially treated foam edge suspension.
In Stock
Regular Price$27.20
Sale Price
Part # 292-2592

Product Details

Lanzar MAXP84 8" 800 Watt Subwoofer

Lanzar's MAXP84 is a 8" high powered subwoofer with non-press paper cone and specially treated foam edge suspension. Features a 1.5" high temperature aluminum voice coil. Rubber magnet boot cover.

Product Specifications
  • Nominal Diameter8"
  • Power Handling (max)800 Watts
  • Impedance4 ohms
  • Sensitivity88 dB 1W/1m
  • Voice Coil Diameter1.5"
  • Magnet Weight50 oz.
Thiele-Small Parameters
  • Resonant Frequency (Fs)60 Hz
  • Mechanical Q (Qms)4.08
  • Electromagnetic Q (Qes)1.2
  • Total Q (Qts)1.1
  • Compliance Equivalent Volume (Vas)6 ft.³
Materials of Construction
  • Cone MaterialPaper
  • Surround MaterialFoam
  • Voice Coil Wire MaterialAluminum
  • Magnet MaterialFerrite
Mounting Information
  • Overall Outside Diameter8.6"
  • Baffle Cutout Diameter7.28"
  • Depth5.04"
  • # Mounting Holes8
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
  • Sealed Volume10.05 ft.³
  • Sealed F361 Hz
Lanzar MAXP84 8" 800 Watt Subwoofer
  • BrandLanzar
  • ModelMAXP84
  • Part Number292-2592
  • UPC068888891653
  • Product CategoryCar Subwoofer Speakers
  • Unit of MeasureEA
  • Product Rating
    (4 Reviews)
  • Weight6.28 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Lanzar MAXP84 8" 800 Watt Subwoofer
in the Car Subwoofer Speakers product category.


Lanzar MAXP84 8" 800 Watt Subwoofer
Lanzar MAXP84 8" 800 Watt Subwoofer is rated 4.5 out of 5 by 4.
Rated 4 out of 5 by from GOOD VALUE, RICH SOUND.I bought these for a garage speaker box build. I built the subwoofer box for some old speakers that I had. After listening to the sound, I knew that all of the work that I put in the box would not be justified with those old speakers.I searched around here and found these Lazar 8" woofers for way less than I had planned on spending. I liked the honesty of the reviews, but was a bit skeptical about the 4 ohm impedance and the 800 watt claim.When I received the speakers, instantly I had to hook them up. I was a tad frustrated about the block used for hooking up the speaker wire though. There is a one inch block with 3mm allen head screws used to secure the speaker wires to the speaker. Behind the block is the same 3mm allen screw used to physically secure the block to the speaker frame. Well, both screws on both of my speakers were loose. Actually, I bought four of these, and all 4 of them were loose, making it a bit tricky to tighten the allen screw for the speaker wire in one hand, while holding the speaker wire, and the block with the other hand. I know what you're thinking: "Why can't you just tighten the block to make it secure so that you have both hands to tighten the speaker wire?" The screw that secures the block is in a very awkward position, behind the speaker frame and you don't have enough room between the frame and the speaker cone to work. I gave up after about 10 minutes of using another shorter hex head allen wrench.Overall, the speakers sound good for the price, and the 4 ohm impedance was not an issue, even when crossed over. My amp maxes out at about 200watts per channel, and at almost max volume, the speaker handles this output well, with very little distortion.The build was an overall success, now all I need to do is build the other subwoofer box!
Date published: 2012-10-17
Rated 5 out of 5 by from Great for the moneyPurchased two of these to replace a pair of blown 8"woofers in my car stereo system. These have pretty good power handling considering the single magnet, and the excursion and sound output is also phenomenal for the price. My only complaint about this woofer is the vent in the back of the magnet is covered by a protective metal grill, in order to keep debris out of the coil, but unfortunately it causes chuffing from the rapid air movement. I would recommend these woofers to anyone, just note that mechanical noise is generated when the woofer is stressed :)
Date published: 2012-08-12
Rated 4 out of 5 by from budget buildI am running six of these in 2.3^3@35hz , with a ap15001d @ .66ohms. I would say the rms rating should be around 150-200 per woofer. you will not find a better 8" in the $25 price range!
Date published: 2012-06-24
Rated 5 out of 5 by from Great StuffI have been buying Lanzar for a while now and this one is no different. Works great and sounds like a much more expensive speaker.
Date published: 2012-02-16
  • 2016-02-11T06:30CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_292-2592, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Lanzar MAXP84 8" 800 Watt Subwoofer

Do you posle send in Macedonia end do you shipping is free 

Asked by: goce
Please contact our sales and customer service for available stock, price and shipping options. or 800-338-0531 x2.
Answered by: MattP
Date published: 2015-03-20

Hi, I'm considering putting four of these in my truck. Would they sound good in a sealed open (no baffles or separators) box at approx. 2.5 cubic feet? Thanks a bunch!

Asked by: LSutterby
These will work well in that volume with relatively heavy fill. You can expect useable response into the 30's.
Answered by: MattP
Date published: 2014-08-21

i want to have a bandpass box for this sub but trying various calcs and the numbers are off or infinite. what is the recomendations. this is for a lil saturn sl2 trunk.

Asked by: lakar1
Please contact our tech support for more help with this question, or 800-338-0531 x1.
Answered by: MattP
Date published: 2014-08-11

Going into a 82 mustang thinkin of runnin 8 of these wiring into pairs to 2ohm on lanzar 2ohm stable 4 chan 400x4 Making a 4 8 ported box and then 2-8 in 2 corner boxes. Yay or nay what sizes ported or sealed???

Asked by: wesmustang82
These will work well in about 0.5 cubic feet sealed each.
Answered by: MattP
Date published: 2014-07-29

will this sub produce tight accurate low bass in a sealed enclosure with 0.3 cubic feet.

Asked by: bj amps
I suspect you won't like the way this driver performs in a 0.3 cubic foot sealed enclosure, this driver definitely calls for a lot of room to play deep bass. Even in a whole cubic foot it's sharply peaked above 200hz and does very little below 100hz - and not much more forgiving in a vented enclosure.I could see it put to good use "free air" under a rear deck, or in an infinite baffle or open baffle or aperiodic enclosure. For a sealed enclosure as tiny as you are suggesting, you'll likely be more satisfied with a lower-powered 6.5" or 6" driver
Answered by: edegaston
Date published: 2015-05-24


how many watts rms can these subs handle i plan on getting four wiring them down to 1ohm loads in a ported box not yet sure on cubic ft
Asked by: bigTERRY
Usually manufactures will list RMS power as half of peak, but Lanzar does not specify. I would say a clean 200 watts to each woofer would be more than enough.
Answered by: MattP
Date published: 2014-07-29
  • 2016-02-11T07:21CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_292-2592, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software