292-2590_ALT_0.jpg
292-2590_ALT_0.jpg
 
292-2590_ALT_0
 

Lanzar MAXP64 6.5" 600 Watt Woofer

Brand:| Model: MAXP64
Overview
Lanzar's MAXP64 is a 6.5" high powered subwoofer with non-press paper cone and specially treated foam edge suspension.
Part # 
292-2590
Weight: 3.87 lbs.  
IN STOCK
List Price$57.99
You Save63%
Your Price
$20.92
Buy 4-up$20.00
Part # 292-2590
Qty:  EA
Available Payment Methods

Product Details

Lanzar MAXP64 6.5" 600 Watt Woofer

Lanzar's MAXP64 is a 6.5" high powered subwoofer with non-press paper cone and specially treated foam edge suspension. Features a 1.5" high temperature aluminum voice coil. Rubber magnet boot cover.

Specifications: • Impedance: 4 ohm • Fs: 80 Hz • Qms: 4.05 • Qes: 1.3 • Qts: 1.2 • SPL: 87 dB • Vas: 6.8 cu. ft. • Magnet weight: 40 oz. • Mounting depth: 3".



Product Specifications
  • Speaker Size6-1/2"
  • Speaker TypeMidrange / Midbass
  • Power Handling (RMS)600 Watts
Lanzar MAXP64 6.5" 600 Watt Woofer
  • BrandLanzar
  • ModelMAXP64
  • Part Number292-2590
  • UPC068888891660
  • Product CategoryDash, Door & Deck Car Speakers
  • Unit of MeasureEA
  • Weight3.87 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Lanzar MAXP64 6.5" 600 Watt Woofer
in the Dash, Door & Deck Car Speakers product category.

Reviews

Lanzar MAXP64 6.5" 600 Watt Woofer

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Lanzar MAXP64 6.5" 600 Watt Woofer

What is the frequency response of this woofer, and will it make a good replacement for a 6.5" ported bass tube?

Asked by: jpsyoda
Unfortunately Lanzar does not specify the frequency response for this woofer, but I doubt it will play very well above 1kHz. We need a little more information about the tube you want to put this is in order to help, please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2014-09-02

I want to put 4 of them facing forward under the back seat of my truck in a custom box, should I build a sealed or ported box?

Asked by: SoCalCarGuy
These work best in a sealed enclosure.
Answered by: MattP
Date published: 2014-06-28

car rear door mount

I would like to mount one of these subs in each of the rear doors of my car. Is anyone aware if this sub can be used in that manner (not in a specifically designed/built sealed or ported box)? Thank you in advance for the help.
Asked by:
Sure the driver will work just fine in this application. My suggestion would be to make sure that the door is sealed as well as possible. If you can use closed cell foam and a layer of vinyl or something like that to seal the inside of the door from the outside to stop the rear wave of the driver from interfering with the outside wave that would be as good as it gets.
Answered by: Musgofasa
Date published: 2014-06-28

rear car door mount

I would like to use one of these subs in each of my rear doors in my car. Is anybody aware if these speakers can be used in that manner (not in a specifically designed sealed or ported box)? Thank you in advance for the help.
Asked by:
No woofer performs well unless in a solid enclosure. Rear decks are often reinforced or have custom cabinets. To make a pair of doors perform well with a sub would require extraordinary bracing and sound deadening. Doors are good for mid-bass... For subs - stick to a cabinet
Answered by: MarkAJH
Date published: 2013-01-24

I have never heard of this brand of speaker and was wondering what the quality of it is?

Asked by: DarylBG
Lanzar has typically always made really tough amps and woofers. Ive seen some Lanzar gear put thru some serious torture. I think the company has been bought by another since, and I havent had any experience with their recent products however. I think this little sub would be fun to work with, it sure looks robust!
Answered by: C from Claypool
Date published: 2014-06-28

does this sub have 2 channels?

i have a 600 watt 4 channel bridgable amp i want to bridge the amp an use all the power for this sub.im hopping its a 2 channel sub
Asked by: subbbb
You didn't state if you were running a Pair or just One Sub.The Sub is NOT a DVC (Dual Voice Coil) and the Amp is a 4-Channel. By "bridging" your amp you will go from 4 to 2 Channels and you will only put out half the total potential of your Amp. You can always use the remaining 2 Channels to power a set of Front or Rear speakers (4 Ohm only) OR 2 Subs "bridged" OR 4 Subs individually.
Answered by: No Hear Audio
Date published: 2014-06-28

Customer Projects

Customer projects that include: Lanzar MAXP64 6.5" 600 Watt Woofer

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

292-2590_ALT_0.jpg
Part # 292-2590
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1