HiVi F10 10" Woofer

HiVi F10 10" Woofer

Brand:| Model: F10
Overview
The HiVi F10's design has been optimized for dynamic low bass performance in a compact or medium size vented enclosure.
Highlights
  • Light and extremely rigid cone made from Kevlar/paper composite
  • High loss rubber surround
  • High power handling polyimide former voice coil
  • Long-throw motor system with extended linear excursion capability
  • High-density aluminum die-cast basket
Part # 
297-450
Weight: 10.14 lbs.  
IN STOCK
List Price$201.99
You Save40%
Your Price
$119.98
Buy 4-11 $104.86
Buy 12-up$99.44
Part # 297-450
Qty:  EA
Available Payment Methods

Product Details

HiVi F10 10" Woofer

The HiVi F10's design has been optimized for dynamic low bass performance in a compact or medium size vented enclosure. The F10 utilizes a newly developed matrix of Kevlar and paper fibers. The cone weighs less, is more rigid, and has an improved damping factor. It keeps distortion very low through the woofer's wide frequency and power range. The driver has a vented pole piece to avoid air compression and ensure maximum power handling. The long-throw design provides clean and articulate bass performance at high volumes. A massive aluminum die-cast basket has been developed to minimize structural resonances. Recommended crossover frequency, 300Hz.



Product Specifications
  • Nominal Diameter10"
  • Power Handling (RMS)100 Watts
  • Power Handling (max)200 Watts
  • Impedance8 ohms
  • Frequency Response28 to 3000 Hz
  • Sensitivity89 dB 2.83V/1m
  • Voice Coil Diameter2"
Thiele-Small Parameters
  • Resonant Frequency (Fs)28 Hz
  • DC Resistance (Re)6.5 ohms
  • Mechanical Q (Qms)5.12
  • Electromagnetic Q (Qes)0.33
  • Total Q (Qts)0.31
  • Compliance Equivalent Volume (Vas)2.78 ft.³
  • Mechanical Compliance of Suspension (Cms)0.42 mm/N
  • BL Product (BL)16.2 Tm
  • Diaphragm Mass Inc. Airload (Mms)72.6g
  • Maximum Linear Excursion (Xmax)6 mm
  • Surface Area of Cone (Sd)363 cm²
Materials of Construction
  • Cone MaterialPaper / Kevlar
  • Surround MaterialRubber
  • Voice Coil FormerKapton® / Polyimide
  • Basket / Frame MaterialCast Aluminum
  • Magnet MaterialFerrite
Mounting Information
  • Overall Outside Diameter11.26"
  • Baffle Cutout Diameter9.29"
  • Depth4.41"
  • # Mounting Holes12
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
  • Sealed Volume0.43 ft.³
  • Sealed F377 Hz
  • Vented Volume0.99 ft.³
  • Vented F348 Hz
HiVi F10 10" Woofer
  • BrandHiVi
  • ModelF10
  • Part Number297-450
  • UPC844632021329
  • Product CategoryWoofers
  • Unit of MeasureEA
  • Product Rating
    (4 Reviews)
  • Weight10.14 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the HiVi F10 10" Woofer
in the Woofers product category.

Reviews

HiVi F10 10" Woofer
HiVi F10 10" Woofer is rated 4.0 out of 5 by 4.
Rated 4 out of 5 by from Replaced JBL LX55 Woofers With TheseI loved my JBL LX55's until the foam degraded on one side. I decided to replace them with these F10's because the enclosure was the right size and ported, both spec'd by the F10's. At first I was disappointed because I expected to hear something different, having installed one and compared to the operational JBL. Then I realized that it was just like the JBL that I was enamored with over the years, controlled and smooth, not overly deep, but truly a low frequency driver.These are very well constructed, expertly packaged, and very good performers.
Date published: 2013-04-03
Rated 4 out of 5 by from Real Nice Woofer For a Tower 4 Way SystemThis is a nice speaker building subwoofer projects and also for building a 3/4 way system for home entertainment of music that requres a strong bass. The bass is deep and tight and represents good value for money. What more could you ask for. Go ahead and check this woofer out.
Date published: 2007-06-29
Rated 4 out of 5 by from Real Nice Woofer For a Tower 4 Way SystemThis is a nice speaker building subwoofer projects and also for building a 3/4 way system for home entertainment of music that requres a strong bass. The bass is deep and tight and represent good value for money. What more could you ask for. Go ahead and check this woofer out.
Date published: 2007-06-29
Rated 4 out of 5 by from Real Nice Woofer For a Tower 4 Way SystemThis is a nice speaker building subwoofer projects and also for building a 3/4 way system for home entertainment of music that requres a strong bass. The bass is deep and tight and represent good value for money. What more could you ask for. Go ahead and check this woofer out.
Date published: 2007-06-29

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
HiVi F10 10" Woofer

Customer Projects

Customer projects that include: HiVi F10 10" Woofer

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

HiVi F10 10" Woofer
Part # 297-450
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1