266-274_ALT_1.jpg
266-274_ALT_1.jpg
 
266-274_ALT_0
 
266-274_ALT_1
 

Manuals & Resources

Harrison Labs FMOD Inline Crossover Pair 100 Hz High Pass RCA

FMODs™ feature a 12 dB per octave crossover slope and are compatible with all RCA type input amps. Sold in pairs.
In Stock
Your Price
$25.90
Buy 4+$23.55
Part # 266-274
Share:

Product Details

Harrison Labs FMOD Inline Crossover Pair 100 Hz High Pass RCA

What is an FMOD™? The FMOD™ is an active crossover simulator. It is better than a much more expensive electronic crossover that requires power to operate. FMODs™ are packaged in pairs and can be combined with other FMODs™ to obtain bandpass ranges or with other types of crossovers to change the slope and crossover frequency point. FMODs™ feature a 12 dB per octave crossover slope and are compatible with all RCA type input amps...simply place the FMOD™ in-line with the patch cable running between the source (head unit) and the amplifier. 24kt gold over brass construction, 10 volts maximum RMS input. One-year manfacturer warranty. Made in the U.S.A.



Product Specifications
  • Crossover TypeHigh Pass
  • ConfigurationInline Line Level
Harrison Labs FMOD Inline Crossover Pair 100 Hz High Pass RCA
  • BrandHarrison Labs
  • Part Number266-274
  • UPC844632053214
  • Product CategoryIn-Line Crossovers
  • Unit of MeasurePR
  • Product Rating
    (5 Reviews)
  • Weight0.0908 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Harrison Labs FMOD Inline Crossover Pair 100 Hz High Pass RCA
in the In-Line Crossovers product category.

Reviews

Harrison Labs FMOD Inline Crossover Pair 100 Hz High Pass RCA
Harrison Labs FMOD Inline Crossover Pair 100 Hz High Pass RCA is rated 4.6 out of 5 by 5.
Rated 5 out of 5 by from Great Product!!Great product!! Does exactly what its suppose to do.
Date published: 2014-02-14
Rated 5 out of 5 by from Better than active crossoversThese work exactly as intended rolling off the low end and only reducing the line level by a couple db. Great lower cost alternative to using powered active crossovers.
Date published: 2013-02-25
Rated 4 out of 5 by from They workI have them in line from pre-amp to power amp on my shop's receiver, and I use the "sub out" for the sub woofers. I was really giving the full range speakers too much bass power. These filters took care of that and I hear no performance issue other than my smaller speakers are not limiting my volume now.These are a simple product and they work as expected. I was going to build these myself but for about $13 each it was not worth my time and trouble. I consider these a decent value and they seem to work fine for my application. they appear to be built well.I would purchase them again should the need arise.
Date published: 2009-08-24
Rated 5 out of 5 by from These Work Great!I needed to block some bass from my JBL DJ Monitor...a pair of these did the trick, and NO RACKMOUNT CROSSOVER! Plug-n-Play at its best!
Date published: 2008-10-22
Rated 4 out of 5 by from Simple and effectiveI used a pair of these F-MODs to remove the bass from the music feeding a paging system, allowing the amp to run cooler without wasting power on frequencies that the speakers can't reproduce anyway. They did just what they were supposed to do.
Date published: 2007-10-31
  • 2015-08-03T07:41CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_266-274, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Harrison Labs FMOD Inline Crossover Pair 100 Hz High Pass RCA

Does it matter which direction these are hooked in - does the male end go into the mixer or the amp

Asked by: RaveStomp
These should be bi-directional, you may want to contact the manufacturer for a more direct answer.
Answered by: MattP
Date published: 2015-03-15
  • 2015-08-03T08:32CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_266-274, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1986-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software