320-718_ALT_0.jpg
320-718_ALT_0.jpg
 
320-718_ALT_0
 

Hammond 1591ESBK ABS Project Box Black 7.5" x 4.4" x 2.4"

Brand:| Model: 1591ESBK
Overview
Made of ABS with two piece lap construction to protect against dust and splashing water. Countersunk lid is secured with self tapping slotted screws (included). Ideal for use as an electronic instrument enclosure, with slots for mounting printed circuit boards.
Part # 
320-718
Weight: 0.4 lbs.  
IN STOCK
Order Soon - Only 4 Left In StockMore Due In October 24, 2014
Regular Price$7.46
You Save21%
Sale Price
$5.89
Part # 320-718
Qty:  EA
Available Payment Methods

Product Details

Hammond 1591ESBK ABS Project Box Black 7.5" x 4.4" x 2.4"

Made of ABS with two piece lap construction to protect against dust and splashing water. Countersunk lid is secured with self tapping slotted screws (included). Ideal for use as an electronic instrument enclosure, with slots for mounting printed circuit boards. Black in color. Made in Canada. Hammond #1591ESBK.

Specifications: • Dimensions: 7.5" L x 4.4" W x 2.4" H.



Product Specifications
  • TypeProject Boxes / Cases
  • Construction MaterialABS Plastic
Hammond 1591ESBK ABS Project Box Black 7.5" x 4.4" x 2.4"
  • BrandHammond Manufacturing
  • Model1591ESBK
  • Part Number320-718
  • UPC623980557403
  • Product CategoryProject Boxes
  • Unit of MeasureEA
  • Product Rating
    (5 Reviews)
  • Weight0.4 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Hammond 1591ESBK ABS Project Box Black 7.5" x 4.4" x 2.4"
in the Project Boxes product category.

Reviews

Hammond 1591ESBK ABS Project Box Black 7.5" x 4.4" x 2.4"
Hammond 1591ESBK ABS Project Box Black 7.5" x 4.4" x 2.4" is rated 4.8 out of 5 by 5.
Rated 5 out of 5 by from great caseWell made sturdy case. no cutting edges. good case
Date published: 2013-08-29
Rated 4 out of 5 by from Hammond 1591ESBK ABS Project Box BlackNice little sturdy box. Fits project Battery nicely.
Date published: 2013-05-10
Rated 5 out of 5 by from Nice..but....!This box was exactly what I was needing, but a one thing would have been nice. I had to add some mounts so I could install a PCB at the bottom portion of the lid.
Date published: 2012-10-14
Rated 5 out of 5 by from EXELENT PROJECT BOXVERY WELL FORMED, VERY CLEAN LINES WITH A NICE FINISH. STRONG STURDY CASE FOR RUGGED SERVICE
Date published: 2008-09-11
Rated 5 out of 5 by from Good quality, great priceThis is perfect for a budget project or concealing components. I call it "the black box".
Date published: 2007-12-24

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Hammond 1591ESBK ABS Project Box Black 7.5" x 4.4" x 2.4"

What is the exact inside measurements?

Asked by: JayHawk3
Here is a PDF file from Hammond on the dimensions. http://www.hammondmfg.com/pdf/1591E.pdf
Answered by: cemorela
Date published: 2014-04-03

Does it have standoffs on bottom to mount pcbs?

the width is a little too big, do you have anything similar about 7"-6.25" x 3" x 2"-3"?
Asked by: Dannn
This type of project box is designed for your PCB to slide into molded grooves end-to-end or side-to-side. A possible solution when I have used this enclosure in the past, drill holes into the bottom and align with mounting holes in PCB. Insert threaded 2-4mm(dia) and 4-6mm length from the bottom, add nut on inside then adjust for the height of PCB, add nut on top.Check the mfg spec sheet:http://www.hammondmfg.com/pdf/1591E.pdf
Answered by: BBeck
Date published: 2014-04-03

How thick are the walls and lid of the box? (My panel mount hardware needs to fit.)

Asked by: hi fi man
The walls are ribbed, at the thickest points they are approximately 0.125", and at the thinnest they are 0.080". The lid is going to be the same 0.080" material, with a raised area inside traversing the center of the lid between the middle screw holes. This area is not as heavy as the ribs in the box itself, however, I do not have a proper caliper to take accurate measurements on the lid due to its construction with a "lip" that fits inside the box.
Answered by: RussR
Date published: 2014-04-04

Customer Projects

Customer projects that include: Hammond 1591ESBK ABS Project Box Black 7.5" x 4.4" x 2.4"

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1