Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
GRS 6AS-4 6-1/2" Dual Cone Replacement Car Speaker 4 Ohm
Replacing all 4 speakers in the car. The factory front door speakers are 6.5 inch, 4 ohms each, the back door ones are 5.25inch, 8 ohm units. Can use 4 ohm units all around and maybe install imedence matching resistors to correct load?
will these fit a 2007 2door ls colbat?
These should fit but we cannot guarantee the screw holes lining up with the factory mounting locations.
Date published: 2015-08-03
Will these replace my factory speekers in a 2003 chevy suburban 1500 ... two front doors and 2 rear doors also ...
Yes these should fit without a problem. You may need to drill new screw holes but I cannot say for sure.
Date published: 2015-06-25
I am trying to replace a 6" round but is sort of squarish around the bolt holes because they are oval. The bolt holes in mine are 4 3/8 cc and the height is 2 1/8 inches. Frame is 6". Please compare this to yours.
Please contact our tech support for more help with this question, firstname.lastname@example.org or 800-338-0531 x1.
Date published: 2015-05-05
does these speakers fit in a 1994 ford explorer driver side door
That vehicle has 6x8's in the front and rear, so these will require adapters in order to fit properly. Unfortunately we do not have the proper adapter for this application.
Date published: 2015-03-16
will the 4 ohm work for 8 ohm system.
I would not recommend using a 4 ohm speaker on an 8 ohm system.
Date published: 2015-02-24