The Reference series of cartridges are designed for maximum fidelity using machined Australian Jarrah wood housings. A considerable tip mass reduction of 10% over the Prestige series results in a frequency response to 60 kHz and beyond, and tracking forces from 1-2 grams. Grado's Reference Series cartridges are considered by experts to be the reference standard with regards to audiophile performance.
The Platinum1 uses a four-piece OTL (optimized transmission line) cantilever technology and dissimilar materials to minimize resonances. Ultra-high purity, long crystal, oxygen-free (UHPLC) wire in the coils maintain signal integrity, as does Grado's specially designed diamond mounted in a brass bushing.
Each Grado Platinum1 phono cartridge is hand-made in Brooklyn, New York and tested for frequency response, channel balance, phase linearity, inductance, and resistance. All PLATINUM1 cartridges feature user-replaceable stylii.
• Frequency response: 10-60,000 Hz
• Operating principle: Moving iron
• Channel separation: 40 dB @ 1 kHz (5 cm/sec.)
• Input load: 47k ohms
• Output: 5 mV @ 1 kHz (5 cm/sec)
• Recommended tracking force: 1.5 grams
• Stylus type: Elliptical
• Inductance: 45 mH
• Resistance: 475 ohms
• Compliance CUs: 20
• Mounting type: Standard 1/2"
• Weight: 6.5 grams
Note: Grado products cannot be shipped to customers that live outside of the U.S.A.