Goldwood GW-12PC-8 12" Heavy Duty Woofer 8 Ohm

Goldwood GW-12PC-8 12" Heavy Duty Woofer 8 Ohm

Brand:| Model: GW-12PC-8
Overview
The Heavy Duty PC Series is available in 4 ohm and 8 ohm versions for automotive and home audio applications. The woofers feature aluminum die-cast frames, knurled and gold-plated binding posts, rubber surrounds, and vented pole pieces with bumped back plates.
Part # 
290-334
Weight: 9.6 lbs.  
IN STOCK
Your Price
$69.63
Buy 4-up$64.51
Part # 290-334
Qty:  EA
Available Payment Methods

Product Details

Goldwood GW-12PC-8 12" Heavy Duty Woofer 8 Ohm

The Heavy Duty PC Series is available in 4 ohm and 8 ohm versions for automotive and home audio applications. The woofers handle the most powerful of amplifiers while maintaining sonic excellence. They feature aluminum die-cast frames, knurled and gold-plated binding posts, rubber surrounds, and vented pole pieces with bumped back plates.



Product Specifications
  • Nominal Diameter12"
  • Power Handling (RMS)225 Watts
  • Power Handling (max)450 Watts
  • Impedance8 ohms
  • Frequency Response32 to 4,000 Hz
  • Sensitivity89.8 dB 2.83V/1m
  • Voice Coil Diameter2"
  • Magnet Weight50 oz.
Thiele-Small Parameters
  • Resonant Frequency (Fs)32.97 Hz
  • DC Resistance (Re)7.1 ohms
  • Voice Coil Inductance (Le)2.1 mH
  • Mechanical Q (Qms)3.83
  • Electromagnetic Q (Qes)0.56
  • Total Q (Qts)0.49
  • Compliance Equivalent Volume (Vas)3.03 ft.³
  • Mechanical Compliance of Suspension (Cms)0.25 mm/N
  • BL Product (BL)15.7 Tm
  • Diaphragm Mass Inc. Airload (Mms)93.1g
  • Maximum Linear Excursion (Xmax)5 mm
  • Surface Area of Cone (Sd)494.02 cm²
Materials of Construction
  • Cone MaterialPoly
  • Surround MaterialRubber
  • Basket / Frame MaterialCast Aluminum
  • Magnet MaterialFerrite
Mounting Information
  • Overall Outside Diameter12.25"
  • Baffle Cutout Diameter11.125"
  • Depth5.375"
  • # Mounting Holes8
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
  • Sealed Volume1.27 ft.³
  • Sealed F356 Hz
  • Vented Volume4.22 ft.³
  • Vented F328 Hz
Goldwood GW-12PC-8 12" Heavy Duty Woofer 8 Ohm
  • BrandGoldwood
  • ModelGW-12PC-8
  • Part Number290-334
  • UPC643420100228
  • Product CategoryWoofers
  • Unit of MeasureEA
  • Product Rating
    (30 Reviews)
  • Weight9.6 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Goldwood GW-12PC-8 12" Heavy Duty Woofer 8 Ohm
in the Woofers product category.

Reviews

Goldwood GW-12PC-8 12" Heavy Duty Woofer 8 Ohm
Goldwood GW-12PC-8 12" Heavy Duty Woofer 8 Ohm is rated 4.4333 out of 5 by 30.
Rated 5 out of 5 by from The best for the priceLove the sound of these speakers, I brought 4 of them. Would buy more when needed . The bass is great . I did have to tweet my speaker hole a bit to fit the new speakers in but it was worth it!
Date published: 2014-02-11
Rated 5 out of 5 by from Big ImprovmentI replaced my worn out Pioneer speakers with these Goldwood speakers and to my surprise my stereo sounds better now than it ever did. Now I am kinda glad they ran out of the Pioneer speakers i was originally going to by. Best value I could have gotten for my money.
Date published: 2013-02-15
Rated 5 out of 5 by from Replacement sub for Technics 3 way towerWasn't sure where to source replacement speakers for my towers. Got these 12" and I am amazed at the deep rich bass it produces. I would definately keep shopping here.
Date published: 2012-03-06
Rated 5 out of 5 by from Excellent SQI got 2 of these subs to replace my old subs in my (Scott) 3 ways floor stand. I couldn't of picked a better speaker. The SQ is spot on. And for the price of only $106.84 for the pair, My system sounds Excellent.I would have preferred to have spring loaded speaker connectors. But the screw type are better then the push-on type.I would buy this product again.
Date published: 2012-02-28
Rated 4 out of 5 by from Very good candidate for replacement and new constructionI needed to replace some worn out drivers and the specifications of the Goldwood were spot on for my use. My homemade speakers came to life again and they are a pleasure to listen to again. Another example of a good value from Parts Express.
Date published: 2012-01-12
Rated 4 out of 5 by from Easy PeazyReplaced old, dried out, disintegrated 12 in. woofer in my Altec Model 9 (circa 1977). Cabinet is approx 3.1 cu. ft. box with 3 in. x 6 in. round duct. Woofer was countersunk into the baffle board and the Goldwood fit perfectly in the recessed cutout and the holes lined up perfrectly. The only complaint was one of the terminals was not aligned properly and may have stressed the vc wire. Bent terminal with pliers and good-to-go. Bass output was very clean and tight without boomy sound. Approx 35 Hz bass in Searching for Forrester CD electronic passage was powerful and clean. Unit is good-looking front and back with a nice cast frame. I will buy more Goldwood products.
Date published: 2011-08-28

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Goldwood GW-12PC-8 12" Heavy Duty Woofer 8 Ohm

Customer Projects

Customer projects that include: Goldwood GW-12PC-8 12" Heavy Duty Woofer 8 Ohm

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1