Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
Goldwood GW-10PC-4 10" Heavy Duty Woofer 4 Ohm
Looking to use these for a replacement to my Cerwin Vega RE25 10w3 woofer. The specs seem right except the sensitivity @ 92 db vs Vegas @ 95db. How will this effect overall sound?
We do not have a cross reference available for this type of thing. Please contact our tech support for more help with this question, firstname.lastname@example.org or 800-338-0531 x1.
Date published: 2015-06-29
What would be the tuning freq and power handling for two of these in a 2.1 cubic foot enclosure with acoustic stuffing?
A 4" diameter port that is 7" long for both will tune the box to 40 Hz and have an F3 of 46 Hz. These will handle full RMS power down to about 33 Hz before excursion problems.
Date published: 2014-11-20
Is it okay to elbow a port inside a cabinet if the box is to shallow from front to back ?
Absolutely, this is very common.
Date published: 2014-10-14
Using in a sealed enclosure with 1.15 Ft. Cu. . My question is if I would gain anything if I added a port. Will have to be in the rear panel on the opposite end of the woofer. They do sound pretty good as they are but just not getting that very bottom end
These will perform better in that volume if it was ported. I would recommend a 3" diameter, 9-1/2" long port for a tuning frequency of 40 Hz.
Date published: 2014-12-23
sorry but I have doubts, I have seen these speakers in this other website: SIMPLY SPEAKERS and characteristics are different: 200w rms 25-3000 Hz, which is correct?
I cannot speak for the other website. Our products come directly from Goldwood and specs are updated on a regular basis to reflect what the manufacturer has published.
Date published: 2014-06-23
want 2 run it in a .95cuft box sealed crossedover at 250hz lowpass is this doable?
Two of these will work well in 0.95 cubic feet although you will not get much below 40 Hz. This will be dependent on room gain and placement of the subwoofer.
Date published: 2013-01-25