Goldwood GT-336 1" Titanium Dome Tweeter 4-1/2" x 3-1/2"

Brand:|Model: GT-336
All of these tweeters feature a 1" pure titanium dome with a phase shield to provide a controlled high frequency roll off.
In Stock
Regular Price$10.81
You Save20%
Sale Price
Part # 270-160

Product Details

Goldwood GT-336 1" Titanium Dome Tweeter 4-1/2" x 3-1/2"

All of these tweeters feature a 1" pure titanium dome with a phase shield to provide a controlled high frequency roll off.

Product Specifications
  • Tweeter TypeMetal Dome
  • Cone / Dome Diameter1"
  • Impedance8 ohms
  • Power Handling (RMS)45 Watts
  • Frequency Response3,500 to 20,000 Hz
  • Sensitivity90 dB 1W/1m
Thiele-Small Parameters
  • Resonant Frequency (Fs)1,500 Hz
  • DC Resistance (Re)6.80 ohms
Mounting Information
  • Cutout Diameter3.13"
Goldwood GT-336 1" Titanium Dome Tweeter 4-1/2" x 3-1/2"
  • BrandGoldwood
  • ModelGT-336
  • Part Number270-160
  • UPC643420500127
  • Product CategoryTweeters
  • Unit of MeasureEA
  • Product Rating
    (19 Reviews)
  • Weight1.32 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Goldwood GT-336 1" Titanium Dome Tweeter 4-1/2" x 3-1/2"
in the Tweeters product category.


Goldwood GT-336 1" Titanium Dome Tweeter 4-1/2" x 3-1/2"
Goldwood GT-336 1" Titanium Dome Tweeter 4-1/2" x 3-1/2" is rated 4.1579 out of 5 by 19.
Rated 5 out of 5 by from Brought my B&W speakers back to lifeI had been unable to locate a replacement soft-dome tweeter for an 80s era B&W DM 70 Bookshelf speaker, so I bought two of these. I put one in the bad speaker and compared side-by-side with the Good original speaker. The Goldwood was slightly brighter, as you would expect for a titanium tweeter, and very pleasing. I then replaced the good B&W tweeter, and now have an excellent pair of Bookshelf speaker for a very modest investment.
Date published: 2015-03-12
Rated 5 out of 5 by from decent tweets for vintage polk monitor 10sI was looking to replace a tweeter that had blown. I bought a used replacement. Which was defictive. At the price of 30. 00 plus shipping. Needless to it was as is. Back to these. I looked at some reviews here to see if anyone had used these on the polks i found one or two. So i bought two of them. There really close in build magnets are almost identical all in all there about as close as you gonnia get to them with out getting the original s. As for installing them there a little wider and longer. I took the polk tweeter covers put them over the gold wood coversmarked them trimmed them with a tin snips. Then i useed 100 grit sand paper to even them out and 220 two finish them. Put them inplace where the original s were. I did both installed the one that was bad. I hooked them up to do a listen ing. Test. To my supprise. There was very little difference. As far as i could tell actually they sound better. Ihave a set of 5s as well the tweeters in those work fine. I did a side by side test. I personally liked the sound of the gold woods. For the price and sound you cant go wrong. And took little effort to make them fit an work with the polks. Ide recommend them for replacements or diy. Very good product. And im going to buy some more to keep on hand.
Date published: 2014-11-13
Rated 4 out of 5 by from Not badPretty loud. Sounds good. Just wish the speaker terminals were located more out of the way of mounting.
Date published: 2014-10-21
Rated 5 out of 5 by from great valueafter deciding to bring back to life a pair of 25 year old jbl speakers that had been stored away for several years.I noticed the tweeters were blown and called parts express. for the best price around, the technician quickly knew which speakers to recommend.After installing them they sounded incredible like they did when I first bought them. Thanks Parts Express for your expertise and great service....I'll be back!!!
Date published: 2012-11-01
Rated 5 out of 5 by from just installed 1 set in each bi-polar setup (TWW towers)My setup is a TWW with bi-polar T's. Dayton 3K crossovers on each T. I also followed one poster who recommended putting half a cotton ball to dampen them and that was super easy and sounded much better. They sounded really controlled as they were before cotton balls and off axis has an awesome response. I will leave the diffusers in place and not cut them out since off axis is so good. They sound very controlled and poised. Clarity is great and seem to handle what i've thrown them as far as power.reference: Yamaha rec. 110 watts x5, "Flat" YPAO calibration
Date published: 2011-05-02
Rated 4 out of 5 by from Can be coaxed into Boston Acoustics A100 Series IIWith about 5 minutes work each, the faceplates on these can be modified for use in Boston Acoustic A100 Series II. Remove plastic plate from diaphram/magnet assembly. Shave/Plane/Saw about 5/32" off the bottom of the plate. Carefully nip each remaining corner of the plate off at an angle. Test fit, adjust as necessary, re-assemble tweeter and hook it up. You will be pleasantly surprised at the performance of this tweeter, especially for so low a price. Note: For the A100s, the yellow wire is negative (-) for the tweeter.
Date published: 2010-11-13
  • 2015-11-27T06:22CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_US, sid_270-160, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Goldwood GT-336 1" Titanium Dome Tweeter 4-1/2" x 3-1/2"

Mounting hole dimensions?

Anyone have the mounting hole to hole dimensions?
Asked by: Heavy Sixer
The screw holes measure 3-7/16" W x 2-3/4" H.
Answered by: MattP
Date published: 2013-07-10
  • 2015-11-27T06:44CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_270-160, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Get Sales Flyer
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1986-2015 Parts Express, All Rights Reserved

Live Chat Software