280-110_ALT_1.jpg
280-110_ALT_1.jpg
 
280-110_ALT_0
 
280-110_ALT_1
 

Goldwood GM-85/4 Heavy Duty 5" Sealed Back Midrange 4 Ohm

Brand:| Model: GM-85/4
Overview
Sealed back midrange eliminates need for separate midrange enclosure. Features poly-mica cone, treated foam surround, and aluminum voice coil for higher power handling.
Part # 
280-110
Weight: 1.8 lbs.  
IN STOCK
Your Price
$9.97
Buy 4-up$9.25
Part # 280-110
Qty:  EA
Available Payment Methods

Product Details

Goldwood GM-85/4 Heavy Duty 5" Sealed Back Midrange 4 Ohm

Sealed back midrange eliminates need for separate midrange enclosure. Features poly-mica cone, treated foam surround, and aluminum voice coil for higher power handling.



Product Specifications
  • Nominal Diameter5"
  • Power Handling (RMS)60 Watts
  • Power Handling (max)120 Watts
  • Impedance4 ohms
  • Frequency Response500 to 15,000 Hz
  • Sensitivity96 dB 1W/1m
  • Voice Coil Diameter1"
  • Magnet Weight12 oz.
Thiele-Small Parameters
  • Resonant Frequency (Fs)470 Hz
Materials of Construction
  • Cone MaterialPoly
  • Surround MaterialFoam
  • Voice Coil Wire MaterialAluminum
  • Magnet MaterialFerrite
Mounting Information
  • Overall Outside Diameter5.125"
  • Baffle Cutout Diameter4.125"
  • Depth2.5"
  • # Mounting Holes4
Goldwood GM-85/4 Heavy Duty 5" Sealed Back Midrange 4 Ohm
  • BrandGoldwood
  • ModelGM-85/4
  • Part Number280-110
  • UPC643420300031
  • Product CategoryMidrange / Midbass Drivers & Full-Range Speakers
  • Unit of MeasureEA
  • Product Rating
    (11 Reviews)
  • Weight1.8 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Goldwood GM-85/4 Heavy Duty 5" Sealed Back Midrange 4 Ohm
in the Midrange / Midbass Drivers & Full-Range Speakers product category.

Reviews

Goldwood GM-85/4 Heavy Duty 5" Sealed Back Midrange 4 Ohm
Goldwood GM-85/4 Heavy Duty 5" Sealed Back Midrange 4 Ohm is rated 4.4545 out of 5 by 11.
Rated 5 out of 5 by from great sound, cheap price..very sensitive, and very accurate, what more do you need?
Date published: 2014-03-02
Rated 4 out of 5 by from Great value!These are great replacement speakers, sound is excellent for the price. Better than original in my older Infinity speakers.
Date published: 2013-10-27
Rated 5 out of 5 by from Good rear deck speakersi got a these to replace my rear speakers i coundnt hear them anyways they wont get low notes but thats what a sub is for
Date published: 2013-09-11
Rated 4 out of 5 by from loud!!bought 6 of these for a surround sound system, 4 for surround and 2 for center, they work great and are loud, and for the price you cant beat it, although one of them did not have a bass blocker because i lost one, but i wanted to test them out anyways, well after about 10 mins of loud movie playing, the one without the crossover burned out. it was nowhere near over 100 watts tho... so be careful what you use them for.
Date published: 2011-02-26
Rated 5 out of 5 by from GreatVery musical, no distortion. Has a very sweet sound in a 3 way. With proper XO, compliments the Woofer and Tweeter, does not overpower them.Great value. Xover used, PA 3-way.
Date published: 2009-12-09
Rated 4 out of 5 by from excellent productgood quality and easy installation, they revived old speakers. highly recommand.
Date published: 2009-10-20

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Goldwood GM-85/4 Heavy Duty 5" Sealed Back Midrange 4 Ohm

I have 2 12'' woofer @ 8ohms 30hz~3.2khz one super tweeter @ 8ohms 5000hz~40,000hz running woofer in parallel. and two of these goldwood midrange in series. which of the two dayton 3 way crossover should i use? 625/5000 or 700/5600 or does it matter  

Asked by: output
In this case it won't really matter, either of these crossovers will work and there will probably be very little difference between the two audibly.
Answered by: MattP
Date published: 2014-04-07

What would the measurement be from hole to hole on the mounting where screws go?

Asked by: ModEmotions
Hello - all that is available is the overall diameter and the cutout diameter. There is no engineering drawing to answer your specific question on this driver.
Answered by: MarkAJH
Date published: 2013-04-08

Customer Projects

Customer projects that include: Goldwood GM-85/4 Heavy Duty 5" Sealed Back Midrange 4 Ohm

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1