270-099_ALT_0.jpg
270-099_ALT_0.jpg
 
270-099_ALT_0
 

Goldwood GM-500PB 1" Horn 1-3/8"-18 TPI

Brand:| Model: GM-500PB
Overview
This high quality, molded plastic horn lens features a wide dispersion angle.
Part # 
270-099
Weight: 1.3 lbs.  
IN STOCK
Your Price
$15.95
Buy 4-19 $13.97
Buy 20-up$11.14
Part # 270-099
Qty:  EA
Available Payment Methods

Product Details

Goldwood GM-500PB 1" Horn 1-3/8"-18 TPI
This high quality, molded plastic horn lens features a wide dispersion angle. Standard 1-3/8"-18 TPI can be used with most threaded drivers. Net weight: 1 lb. Dimensions: 15-3/16" W x 5-1/8" H x 6" D.


Product Specifications
  • Mounting Type1-3/8"-18 TPI
  • Entry / Throat Diameter1"
  • ConstructionABS
Goldwood GM-500PB 1" Horn 1-3/8"-18 TPI
  • BrandGoldwood
  • ModelGM-500PB
  • Part Number270-099
  • UPC643420710052
  • Product CategoryHorns & Waveguides
  • Unit of MeasureEA
  • Product Rating
    (9 Reviews)
  • Weight1.3 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Goldwood GM-500PB 1" Horn 1-3/8"-18 TPI
in the Horns & Waveguides product category.

Reviews

Goldwood GM-500PB 1" Horn 1-3/8"-18 TPI
Goldwood GM-500PB 1" Horn 1-3/8"-18 TPI is rated 4.4444 out of 5 by 9.
Rated 3 out of 5 by from Not the best fitting hornsThese are replacement horns for a set of Nady PS115 piezo horns. They are use in conjunction with some Pyle PDS442 1" Titanium Horn Drivers. The horns actually work and reasonably well. The problem is getting the 1 3/8" thread of the Pyle Drivers into the thread on the back of the horn. We tried to seat the drivers all the way down - wasn't going to happen. They are firmly seated about 1/2 way and are quite secure. Possibly the metal thread liner on the horns is a bit too snug. Don't know.On the plus side, they were easy to install. All of the screw holes matched with the cabinet and they sound good.
Date published: 2013-04-09
Rated 5 out of 5 by from great replacement hornI used these to replace my horn in my carvin 1540 2 way speakers. I blew the hf driver and couldn't get a replacement from carvin. unfortunately the driver was epoxied to the horn so I replaced the horn with the Goldwood GM-500PB 1" Horn 1-3/8"-18 TPI(it is an exact match) and the hf driver with a Selenium D220Ti-16 1" Titanium Horn Driver 16 Ohm 1-3/8"-18 and it fits perfectly and also blows away the carvin stock driver
Date published: 2012-10-17
Rated 5 out of 5 by from Quality horn for good price.Well made with metal threads inside, sounds great. Perfect for replacement horn or DIY project.
Date published: 2012-01-22
Rated 5 out of 5 by from Perfect fitI had purchased a set of used cabinets - unloaded. It was very important to find the horn lens that fit the 22A drivers and 115 cabinets. These had to be the exact size that had been in the cabinets from the factory. The dimensions listed were very accurate. They sound great and have metal threads. They should give years of use! Thank You, Parts Express!!! I ordered on Friday evening... received on Monday morning! :)
Date published: 2012-01-02
Rated 5 out of 5 by from Well BuiltThis unit feels solid and well built.
Date published: 2010-02-01
Rated 4 out of 5 by from you be the the judgecurrently usuing (8) of these horns in conjunction with (8) EV COBRAFLEX-3 for the highs and mids.remember thats (16)total (8) per side. have plans to double that in the near future. matt curttright u.s. post office rockton,il
Date published: 2009-02-17

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Goldwood GM-500PB 1" Horn 1-3/8"-18 TPI

lowest frequency for this horn?

Asked by: bobbo
fc = 800Hz see:http://qcomponents.ca/product.php?productid=412
Answered by: annon
Date published: 2014-02-15

Would these work for an Optimus 990 replacement?

I blew a tweeter in one of my 990s a few years ago and have been searching for either a tweeter to fit in the original horn (haven't been able to find one) or replace the horn and tweeter. Anyone know if this will fit in the cut out?
Asked by: Fastrid
The size of the hole required for this to fit in the enclosure is 13-5/8" x 3-3/4".
Answered by: MattP
Date published: 2013-11-04

What is the horizontal/vertical dispersion of this horn?

Asked by: Chaz H.
Most PA cabinet horns are 40 x 90. There are other tighter configurations for special applications which might be used in an array(with overlapping patterns) but these are not nearly as common especially from an entry level or hobby application.
Answered by: bigrich
Date published: 2012-09-17

Customer Projects

Customer projects that include: Goldwood GM-500PB 1" Horn 1-3/8"-18 TPI

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1