248-783_ALT_0.jpg
248-783_ALT_0.jpg
 
248-783_ALT_0
 

Furman M-8x2 Power Conditioner 15A

Brand:| Model: M-8x2
Overview
A Merit Series power conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.
Highlights
  • AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
  • Spike & surge protection ensures equipment stays safe and your power stays clean
  • 9 total outlets - 8 rear panel outlets and 1 front panel outlet
  • 15 amp rating, with circuit breaker
  • Front panel indicator LED lets you know that your equipment is being protected
  • Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters
Part # 
248-783
Weight: 6.1 lbs.  
IN STOCK
List Price$90.00
You Save27%
Your Price
$64.95
Part # 248-783
Qty:  EA
Available Payment Methods

Product Details

Furman M-8x2 Power Conditioner 15A

A Merit Series power conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.

Specifications: • Maximum output current: 15 amps • Line cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug • Operating voltage: 120 VAC, 60 Hz • Spike protection mode: Line to neutral • Energy dissipation: 170 joules • Peak impulse current: 12,000 amps • Maximum continuous operating voltage: 130 VAC RMS • Let-through voltage (@ 125 amps, 8/20uS waveform): 400 volts • Noise attenuation: Transverse mode: >23 dB, 200 kHz to 10 MHz • Dimensions: 1.75" H x 19" W x 3.75" D • Weight: 4.9 lbs. • Safety agency listing: cTUVus • Three-year limited manufacturer's warranty.

Applications

Instrument Rigs
You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.

Recording
Can't track down where that noise is coming from? Your mix sounding flat? With Furman's standard level RFI/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and nine total outlets, it's enough to power your whole home studio.

DJ Equipment
Bars, clubs and other event venues have some of the worst power out there-from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's standard level protection and filtration keeps the bad stuff out.

Pro Audio
When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.



Product Specifications
  • # Outlets9
  • Special FeaturesRack Mountable
  • Cord Length6 ft.
  • ColorBlack
Furman M-8x2 Power Conditioner 15A
  • BrandFurman Sound
  • ModelM-8x2
  • Part Number248-783
  • UPC654061028307
  • Product CategoryRack Mount Power Distribution
  • Unit of MeasureEA
  • Product Rating
    (12 Reviews)
  • Weight6.1 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Furman M-8x2 Power Conditioner 15A
in the Rack Mount Power Distribution product category.

Reviews

Furman M-8x2 Power Conditioner 15A
Furman M-8x2 Power Conditioner 15A is rated 4.75 out of 5 by 12.
Rated 5 out of 5 by from Best affordable upgradeI bought this product for my amplifier and the product does a very good job. Noise reduction is excellent, hum noise reduced, easy to use, excellent value overall - service from Parts-Express is unsurpassed!!! Excellent service and great prices. Highly recommended!!!
Date published: 2010-01-25
Rated 3 out of 5 by from good value for $60.00good performance for $60.00, but basic, Not many features.
Date published: 2009-10-14
Rated 5 out of 5 by from bacis power outletsimple plug and play. no bells and whistles just power. i run two qsc amps and two mfw 15 subs of of it and runs like a champ
Date published: 2009-06-05
Rated 5 out of 5 by from Perfect for the job.Looks good with the other equipment in the rack and supplies plenty of outlets.
Date published: 2009-05-12
Rated 5 out of 5 by from what I neededHad some slight hum in my left speaker. Completely go rid of it. No bells and whistles like I wanted.
Date published: 2008-11-28
Rated 5 out of 5 by from Does the jobI'm using this to plug up my 4 power amps for my PA system. It's a plain-jane power conditioner that mounts in a 19" rack and takes 1RU. It does the job with no frills. I like Furman. I have several of their power conditioners. This is the only one of this model that I own because it is used on stage out of sight. I don't need any frills like lights or a meter. So for this price, this is well worth the investment.
Date published: 2008-09-13

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Furman M-8x2 Power Conditioner 15A

Customer Projects

Customer projects that include: Furman M-8x2 Power Conditioner 15A

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1