260-305_ALT_4.jpg
260-305_ALT_4.jpg
 
260-305_ALT_0
 
260-305_ALT_1
 
260-305_ALT_2
 
260-305_ALT_3
 
260-305_ALT_4
 

Four Conductor Speaker Wire Spring Terminal

Overview
4 output, quick release spring loaded speaker terminal. Right/left identification. Accepts up to 12 gauge wire. Outer dimensions: 2-3/4" W x 15/16" H.
Part # 
260-305
Weight: 0.0594 lbs.  
IN STOCK
Your Price
$1.28
Buy 10-49 $0.82
Buy 50-499 $0.75
Buy 500-up$0.68
Part # 260-305
Qty:  EA
Available Payment Methods

Product Details

Four Conductor Speaker Wire Spring Terminal

4 output, quick release spring loaded speaker terminal. Right/left identification. Accepts up to 12 gauge wire.

Dimensions: • Outer dimensions: 2-3/4" W x 15/16" H • Cutout required: 3/4" H x 2" W • Connectors accept 0.205" female disconnect terminals.



Four Conductor Speaker Wire Spring Terminal
  • BrandParts Express
  • Part Number260-305
  • UPC844632017391
  • Product CategoryTerminal Plates & Cups
  • Unit of MeasureEA
  • Product Rating
    (12 Reviews)
  • Weight0.0594 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Four Conductor Speaker Wire Spring Terminal
in the Terminal Plates & Cups product category.

Reviews

Four Conductor Speaker Wire Spring Terminal
Four Conductor Speaker Wire Spring Terminal is rated 3.75 out of 5 by 12.
Rated 5 out of 5 by from Good part and nice price.Good service and easy to place orders never had problems.
Date published: 2014-07-07
Rated 4 out of 5 by from Not exactly like replaced part, but usable.I ordered this part based solely on the photos. I was able to make the part work, but not exactly like the Klipsch factory install. I had to install it externally, rather than internally (see photos). I had to radically bend the terminals so that they wouldn't short against the chassis.The quality of this part is a lot better than the replaced Klipsch piece. Much more durable.I would recommend that Parts-Express put more detailed dimensions in the listing for this part.
Date published: 2013-09-23
Rated 5 out of 5 by from great clips!i bought one of these for a mini amp i made for my MP3 player and these worked perfect!
Date published: 2013-09-19
Rated 4 out of 5 by from Decent Quality. Non-Fatal QC issue.This is a much better quality speaker terminal than what is sold by the Shack. Theirs has a strange gap between the plastic housing and inner conductor which causes smaller diameter wire to "spin" and fall out rather than solidly clamping/pinching.The 260-305 has a better wire holding area with a formed "tooth" that bites into the wire. A nice touch.However it does suffer from misalignment on one or more of the metal inserts. It's possible to man-handle the terminal from the rear to re-align it - but what a pain. I'm glad I don't need to buy these very often.
Date published: 2011-08-21
Rated 3 out of 5 by from functional, but thats allIt does its job, but seems cheaply built.
Date published: 2009-11-25
Rated 4 out of 5 by from Minor issue with contactsWe use around 150 of these per year, outside, sunrise to sunset in the field. UV resistant. They have a flaw in the metal clip inside, not being centered in the wire hole. The pictue above looks great. But ours were flawed. 22-24ga wire must be perfectly centered to have good contact but once centered it's very reliable.
Date published: 2009-03-11

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Four Conductor Speaker Wire Spring Terminal

What is the center to center distance between the mounting holes?

Asked by: SFAZ
The mounting holes are 2-3/8" on center.
Answered by: MattP
Date published: 2014-06-04

How much power can you pass through this connection?

Asked by: PowerHungry
Unfortunately the manufacturer does not specify, although these have been successfully used for subwoofer applications handling a few hundred watts without issue.
Answered by: MattP
Date published: 2014-04-30

which solderless terminal mate speaker teminals

Asked by:
This terminal uses 1/4" tabs for wire attachement.
Answered by: MattP
Date published: 2013-09-07

Customer Projects

Customer projects that include: Four Conductor Speaker Wire Spring Terminal

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Related Products

Customers Also Bought

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software