Parts Express Free Shipping at 98 Dollars

262-882_ALT_4.jpg
262-882_ALT_4.jpg
 
262-882_ALT_0
 
262-882_ALT_1
 
262-882_ALT_4
 

Formed Metal Grill Pair

Overview
Our formed metal grills protect your speakers with the same style and strength as the grills on expensive pro PA cabinets. 8 mm round hole, 15" x 22" x 1" grill.
Highlights
  • Rectangular grills give custom speakers a finished look
  • Powder coated 1.2 mm steel—professional strength!
  • Available in three hole patterns/shapes, four sizes each
  • Also available in flat version for custom cutting
  • All versions sold in pairs
Part # 
262-882
Weight: 8.5 lbs.  
IN STOCK
List Price$38.99
You Save17%
Your Price
$32.20
Buy 4-up$29.27
Part # 262-882
Qty:  PR
Available Payment Methods

Product Details

Formed Metal Grill Pair

8 mm round hole, 15" x 22" x 1" grill.  Our formed metal grills protect your speakers with the same style and strength as the grills on expensive pro PA cabinets. The black powder coated 1.2 mm steel is punched in your choice of three hole patterns: 6 mm round (6R), 8 mm round (8R), and 8 mm square (8S). Each hole pattern is available in four finished grill sizes: 12" x 18", 15" x 22", 18" x 28", and 22" x 30". A carefully formed 1" bend on each edge provides extra strength to the grill, as well as creating a convenient mounting "stand off" for many installations. Additionally, each hole pattern is available in a 22" x 30" utility "flat" version (no bends), which can be used as is or custom cut by the user. Available in sizes to fit most 8", 10", 12", 15", and 18" speakers. Note: due to variations in the metal forming process, published dimensions are nominal and should be considered "approximate". Actual grill size could vary from stated dimensions by up to 1/2". Suggested applications: 10" 2-way with horn: 12" x 18" grill 12" 2-way with horn: 15" x 22" grill 15" 2-way with horn: 18" x 28" grill 15" 3-way with cone mid and horn: 22" x 30" grill 18" single driver subwoofer: 22" x 30" grill 2 x 12" guitar cabinet: 18" x 28" grill



Formed Metal Grill Pair
  • BrandParts Express
  • Part Number262-882
  • UPC844632057342
  • Product CategorySteel Speaker Grills
  • Unit of MeasurePR
  • Product Rating
    (3 Reviews)
  • Weight8.5 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Formed Metal Grill Pair
in the Steel Speaker Grills product category.

Reviews

Formed Metal Grill Pair
Formed Metal Grill Pair is rated 4.0 out of 5 by 3.
Rated 4 out of 5 by from Perfect Fit for Item #: (245-325)This grill fits the Birch Plywood cabinet (245-325) perfectly.It is possible that you could notice this grill affecting your Higher Frequencies.The grill is plenty strong to protect your speakers from damage. However I'm fairly picky when it comes to sound and I found I did not like the sound of my Morel MDT-37's or CAT378's as much when I had this grill in front of it. (I remedied the situation by cutting the grill in half so that I can remove it from in front of the tweeter when quality is more important than the present danger of physical damage to it.) I have my speakers crossed over at 1,320 Hz. I could not hear a negative impact on the sound from the woofer so I leave the lower half of my grill on all of the time.I used 1" rubber feet (260-774), 1/4-20 bolts and 1/4-20 allthread couplers from a local hardware store to make this cover easily removable. I permanently bolted the couplers to this grill, and screwed the 1" rubber feet to the cabinet. (The couplers I bought were smaller than a normal 1/4-20 nut so I had to wrap it with some good electrical tape so that it holds the cover on snug.)I wonder if the grill with the smaller holes would have been a better choice for the higher frequencies since it would be a thinner more broken up reflective surface. I'll lean that direction in the future; and that for a chance at better high frequency transparency.
Date published: 2012-08-18
Rated 4 out of 5 by from strong metal grillthis metal grill has a nice finish and it's strong. i used it in my car to cover the whole in the center armrest of the rear seats. this is how i get my bass in to the car. i could bing the armrest up againt the grill and have my kids sit against it and it will not bend. it's just what i needed.
Date published: 2011-02-17
Rated 4 out of 5 by from Works as expectedThis product is slated to be used on a proposed new sub-woofer product to be marketed this Summer '09. Metal was bent on one corner (shipping?), but easily fixed. Product is solidly built and painted with good fit and finish: looks professional. Gives good clearance (1") for driver x-max. Easily adapted to my design.
Date published: 2011-02-17

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Formed Metal Grill Pair

Customer Projects

Customer projects that include: Formed Metal Grill Pair

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1