FaitalPRO 4FE35 4" Professional Woofer 4 Ohm

FaitalPRO 4FE35 4" Professional Full-Range Woofer 4 Ohm

Brand:| Model: 4FE35
Overview
FaitalPRO's do-it-all 4FE35 ferrite 4" full range speaker has high sensitivity and flat frequency response. Perfect for use in pro, home, and car audio applications.
Highlights
  • Superb off-axis frequency response and handles up to 60 watts program power
  • Ferrite version of the 4FE32 full-range woofer
  • Strong ceramic ferrite motor
  • Copper cap in the motor for reduced distortion
  • Made in Italy
Part # 
294-1123
Weight: 1.26 lbs.  
IN STOCK
Your Price
$25.00
Part # 294-1123
Qty:  EA
Available Payment Methods

Product Details

FaitalPRO 4FE35 4" Professional Full-Range Woofer 4 Ohm

FaitalPRO's 4FE35 4" professional woofer has exceptionally flat response from 90 Hz to 6,500 Hz, both on and off-axis, and features a 91 dB sensitivity due to a powerful ferrite magnet. Distortion is reduced through the use of a copper cap to create a demodulation circuit in the motor.

Great for use in compact professional line array speakers, the 4FE35 is also right at home in home audio, personal audio, and car audio applications. It's also ideal for fixed installation applications as a midbass, midrange, or full-range speaker. Made in Italy.



Product Specifications
  • Nominal Diameter4"
  • Power Handling (RMS)30 Watts
  • Power Handling (max)60 Watts
  • Impedance4 ohms
  • Frequency Response90 to 20,000 Hz
  • Sensitivity91 dB 1W/1m
  • Voice Coil Diameter0.75"
Thiele-Small Parameters
  • Resonant Frequency (Fs)100 Hz
  • DC Resistance (Re)3.3 ohms
  • Voice Coil Inductance (Le)0.04 mH
  • Mechanical Q (Qms)3.94
  • Electromagnetic Q (Qes)0.9
  • Total Q (Qts)0.73
  • Compliance Equivalent Volume (Vas)0.07 ft.³
  • Mechanical Compliance of Suspension (Cms)0.65 mm/N
  • Diaphragm Mass Inc. Airload (Mms)3.9g
  • Moving Mass Of Diaphragm (Mmd)4
  • Maximum Linear Excursion (Xmax)1.73 mm
  • Surface Area of Cone (Sd)48 cm²
Materials of Construction
  • Cone MaterialPaper
  • Surround MaterialRubber
  • Voice Coil Wire MaterialAluminum
  • Voice Coil FormerKapton® / Polyimide
  • Basket / Frame MaterialSteel
  • Magnet MaterialFerrite
Mounting Information
  • Overall Outside Diameter5.11" (mounting tabs), 3.96"
  • Baffle Cutout Diameter3.52"
  • Depth2.3"
  • Bolt Circle Diameter4.54"
  • # Mounting Holes4
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
  • Sealed Volume0.23 ft.³
  • Sealed F3110 Hz
  • Vented Volume0.24 ft.³
  • Vented F361 Hz
FaitalPRO 4FE35 4" Professional Full-Range Woofer 4 Ohm
  • BrandFaitalPRO
  • Model4FE35
  • Part Number294-1123
  • UPC848864011103
  • Product CategoryWoofers
  • Unit of MeasureEA
  • Product Rating
    (5 Reviews)
  • Weight1.26 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the FaitalPRO 4FE35 4" Professional Full-Range Woofer 4 Ohm
in the Woofers product category.

Reviews

FaitalPRO 4FE35 4" Professional Full-Range Woofer 4 Ohm
FaitalPRO 4FE35 4" Professional Full-Range Woofer 4 Ohm is rated 4.6 out of 5 by 5.
Rated 5 out of 5 by from Still breaking in, but so far, so goodBreaking in at the moment, but seem to be opening up little by little. Have them high-passed at 200Hz which is where they start to get nice and flat, and well above the resonant frequency. Plenty crisp on the high side. This is part of my 2nd open baffle project, of which I have included a picture. I have them coupled to 4 - 6.5" factory buyouts that seem to be perfect for open baffle. So far, I'm liking the results, but look forward to fully broken in drivers. In case you would like to know, I am bi-amping this 2-way system with a JL Audio 500/5 auto amp, and am using it's electronic crossover circuits at 12db Butterworth slope. Will experiment between that and Linkwitz 24db slope. I have it in home and DC power source is an HP Proliant server PSU that gives up 65amps on the 12 volt rail. According to the numbers, the amp requires around 30 amps at full load, so plenty of head room. Head unit is also automotive based and is Eclipse CD-8445 with 8 volt low output stage. So far it has fit together quite nicely.
Date published: 2014-12-27
Rated 5 out of 5 by from Good sound and reasonably efficientI bought these for a 1984 Jeep. They fit with some modification. I used grilles I had that matched. The sound is clean and more accurate than most auto sound speakers that are similar size. The efficiency is a little better that typical for their size. I used them with a 2x15w class D amp. The combination works very well. I use an iPhone as the source.
Date published: 2014-08-04
Rated 4 out of 5 by from Nice Driver!i needed a 4 ohm 4 inch driver, and this fit the bill pretty good. It is pretty efficient, so gets loud without too much driving it. Decent bass for a full range unit.
Date published: 2014-04-07
Rated 4 out of 5 by from Great supportI had a blown driver but did not know the impedance. Tech support helped me figure it out and the replacement driver is installed and working. Bass is a little more than I would like. But, adjusting on the pre-amp worked fine.
Date published: 2014-01-21
Rated 5 out of 5 by from Great first impressionI was looking for full range drivers for a small portable boom box and liked the efficiency and price point on these units, so I bought a couple of them. I was immediately impressed with them. I would assume they perform better in a line array, but I only had two. I did hook them up in a series to get a feel for a multi speaker design and liked what I heard. I finally just hooked up one for each channel and added a small subwoofer and had exactly what I was looking for in an inexpensive small(ish) boom box that I would enjoy listening to with many different types of music.
Date published: 2013-10-03
  • 2015-05-26T07:12CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_294-1123, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
FaitalPRO 4FE35 4" Professional Full-Range Woofer 4 Ohm

I'm looking for a fostex replacement speaker can I use this faital pro? Or can you recommend a replacement for fostex speaker

Asked by: martebas
Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2015-04-29

I HAVE THE Vifa BC25SC06-04 1" Textile Dome Tweeter and thought this would be a good match for the cabinet that I already have, would it be better to use the 4 ohm or 8 ohm version and which crossover. Any suggestions would be appreciated

Asked by: Magila77
I would recommend contacting our tech support for help with this. 800-338-0531 or tech@parts-express.com.
Answered by: MattP
Date published: 2014-05-19
  • 2015-05-25T09:33CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_294-1123, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Customer Projects

Customer projects that include: FaitalPRO 4FE35 4" Professional Full-Range Woofer 4 Ohm

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1996-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software