7.0mH 18 AWG I Core Inductor

ERSE 7.0mH 18 AWG I Core Inductor

Brand:| Model: ELC54-18-7000
Overview
High grade laminated "I" core inductors are a perfect lower cost alternative for providing large inductance values with low DC resistance and efficient power transfer. Wound with 18 gauge wire to ±5% tolerance, these "I" core inductors will easily handle 250 watts of power.
Part # 
266-574
Weight: 0.7722 lbs.  
IN STOCK
Your Price
$13.88
Buy 10-up$12.67
Part # 266-574
Qty:  EA
Available Payment Methods

Product Details

ERSE 7.0mH 18 AWG I Core Inductor

High grade laminated "I" core inductors are a perfect lower cost alternative for providing large inductance values with low DC resistance and efficient power transfer. Wound with 18 gauge wire to ±5% tolerance, these "I" core inductors will easily handle 250 watts of power. All inductors utilize a 1-1/4" square by 1-3/4" bobbin on a 1/2" square by 3" laminated iron core.  Made in USA.

Specifications: Inductance: 7.0 mH • Wire gauge: 18 AWG • DC resistance: 0.53 Ohms • Tolerance: ±5% • Power handling: 250 watts RMS.



Product Specifications
  • Inductance7 mH
  • Wire Gauge18 AWG
ERSE 7.0mH 18 AWG I Core Inductor
  • BrandERSE Audio
  • ModelELC54-18-7000
  • Part Number266-574
  • UPC844632036415
  • Product CategorySolid Core Inductors
  • Unit of MeasureEA
  • Product Rating
    (2 Reviews)
  • Weight0.7722 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the ERSE 7.0mH 18 AWG I Core Inductor
in the Solid Core Inductors product category.

Reviews

ERSE 7.0mH 18 AWG I Core Inductor
ERSE 7.0mH 18 AWG I Core Inductor is rated 4.5 out of 5 by 2.
Rated 4 out of 5 by from High value partThis nicely made inductor is just the thing where a little extra DCR is desirable or at least not going to hurt anything, compared to a mag-core unit with heavier wire. It has convenient mounting tabs that do not appear in the photo. I'm not sure why anyone would want a solid core, because a laminated core minimizes electrical eddy losses. This would work better, however, if the layers were insulated from each other, which they are not. Not insulating the laminations makes them almost just for show, but is still probably an improvement over a solid core.
Date published: 2011-02-17
Rated 5 out of 5 by from Well Built InductorThis is a well built Iron Core Inductor. My only wish is that the Iron Core is a Solid Iron Core rather than layered strips of Iron gluded together.
Date published: 2011-02-17

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
ERSE 7.0mH 18 AWG I Core Inductor

Customer Projects

Customer projects that include: ERSE 7.0mH 18 AWG I Core Inductor

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1