ERSE 10mH 18 AWG Perfect Layer Inductor Crossover Coil
ERSE 10mH 18 AWG Perfect Layer Inductor Crossover Coil is rated out of 5 by 2.
Rated 4 out of 5
from Not Perfect, But Good Enough AnywayI expected, with a name like Perfect Layer, that this inductor would have perfectly laid coils. It does not. Some of the outer-most coils are a little loose, and in fact my Jatzen inductors are more perfectly laid. However, overall it is still quite well constructed, its specs conform to its actual performance wonderfully, and the price for this particular product is a bit more reasonable than I come to expect from Perfect Layer.
Date published: 2011-09-05
Rated 5 out of 5
by Charles Bratton - 00707
from The Perfect Inductor for our purposes.We are not using this inductor as you normally would. This inductor is used as an output coil for a magnetic pulser as in electro-medical device as in alternative healing methods as in Dr. Bob Beck protocol. Bob Beck invented the original electronic flash to replace disposable photographic flash bulbs. Our unit creates a pulsating magnetic field that can penetrate about 10 inches of body tissue. It is handing up to 15 pulses a seconds and after 10 minutes gets very hot to the touch. The output is approx. 50 kilogauss. At this time we turn it off and let it cool down. We have encapsulated it in epoxy resin with a handle added to make a wand. The north side of the magnetic field it produces is applied to diseased parts of the body. We have had great success with this part and the amplifier pulser unit that drives it. Parts Express is the only company where we have been able to obtain this part. The inductor is very nicely built and tightly wound. Thank you Parts Express!!!
Date published: 2007-07-26