10mH 18 AWG I Core Inductor

ERSE 10mH 18 AWG I Core Inductor Crossover Coil

Brand:| Model: ELC54-19-10000
Overview
High grade laminated "I" core inductors are a perfect lower cost alternative for providing large inductance values with low DC resistance and efficient power transfer. Wound with 18 gauge wire to ±5% tolerance, these "I" core inductors will easily handle 250 watts of power.
Part # 
266-580
Weight: 0.759 lbs.  
IN STOCK
Your Price
$14.10
Buy 10-up$12.86
Part # 266-580
Qty:  EA
Available Payment Methods

Product Details

ERSE 10mH 18 AWG I Core Inductor Crossover Coil

High grade laminated "I" core inductors are a perfect lower cost alternative for providing large inductance values with low DC resistance and efficient power transfer. Wound with 18 gauge wire to ±5% tolerance, these "I" core inductors will easily handle 250 watts of power. All inductors utilize a 1-1/4" square by 1-3/4" bobbin on a 1/2" square by 3" laminated iron core.  Made in USA.

Specifications: Inductance: 10.0 mH • Wire gauge: 18 AWG • DC resistance: 0.58 Ohms • Tolerance: ±5% • Power handling: 250 watts RMS.



Product Specifications
  • Inductance10 mH
  • Wire Gauge18 AWG
  • Inductor TypeSolid Core
ERSE 10mH 18 AWG I Core Inductor Crossover Coil
  • BrandERSE Audio
  • ModelELC54-19-10000
  • Part Number266-580
  • UPC844632029745
  • Product CategorySolid Core Inductor Crossover Coils
  • Unit of MeasureEA
  • Product Rating
    (2 Reviews)
  • Weight0.759 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the ERSE 10mH 18 AWG I Core Inductor Crossover Coil
in the Solid Core Inductor Crossover Coils product category.

Reviews

ERSE 10mH 18 AWG I Core Inductor Crossover Coil
ERSE 10mH 18 AWG I Core Inductor Crossover Coil is rated 3.5 out of 5 by 2.
Rated 4 out of 5 by from Nice inductor for the priceFairly hard to saturate, performs well and it's a nice inductor for the price.
Date published: 2008-06-30
Rated 3 out of 5 by from Inductor....These are some big inductors. Make sure you have room were you will be installing them. They are well made. Finally my sub-box sounds good.....just a little steep in price. Together with shipping not a good bargain if you just need a couple, (like I did).
Date published: 2007-10-25

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
ERSE 10mH 18 AWG I Core Inductor Crossover Coil

What is the maximum current?

I want to know the current limits for this inductor, it's very important for my application. Please.
Asked by: Jorge7777
How hot do you want it to get?I'd suspect that it could handle upwards of 6-7 ampres continuously and maybe 20-30 ampres for a few seconds. I have figures for a single wire in air, but here we have some large number of turns around a core. The actual dissipation will be determined by the resistance of the wire, listed as 0.58 ohms. From that you can directly compute how much heat it will put out and from there how hot the device will be and thus whether the insulation will fail. The only two sources of heat in this device are the resistance of the coper and the hysteresis of the core material.
Answered by: AlonzoTG
Date published: 2012-06-12

Customer Projects

Customer projects that include: ERSE 10mH 18 AWG I Core Inductor Crossover Coil

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Manuals / Resources

Related Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1