1.0mH 18 AWG I Core Inductor

ERSE 1.0mH 18 AWG I Core Inductor Crossover Coil

Brand:| Model: ELC54-18-1000
Overview
High grade laminated "I" core inductors are a perfect lower cost alternative for providing large inductance values with low DC resistance and efficient power transfer. Wound with 18 gauge wire to ±5% tolerance, these "I" core inductors will easily handle 250 watts of power.
Part # 
266-550
Weight: 0.4356 lbs.  
IN STOCK
Your Price
$7.50
Buy 10-up$6.84
Part # 266-550
Qty:  EA
Available Payment Methods

Product Details

ERSE 1.0mH 18 AWG I Core Inductor Crossover Coil

High grade laminated "I" core inductors are a perfect lower cost alternative for providing large inductance values with low DC resistance and efficient power transfer. Wound with 18 gauge wire to ±5% tolerance, these "I" core inductors will easily handle 250 watts of power. All inductors utilize a 1-1/4" square by 1-3/4" bobbin on a 1/2" square by 3" laminated iron core.  Made in USA.

Specifications: Inductance: 1.0 mH • Wire gauge: 18 AWG • DC resistance: 0.17 Ohms • Tolerance: ±5% • Power handling: 250 watts RMS.



Product Specifications
  • Inductance1.0 mH
  • Wire Gauge18 AWG
  • Inductor TypeSolid Core
ERSE 1.0mH 18 AWG I Core Inductor Crossover Coil
  • BrandERSE Audio
  • ModelELC54-18-1000
  • Part Number266-550
  • UPC844632028816
  • Product CategorySolid Core Inductor Crossover Coils
  • Unit of MeasureEA
  • Product Rating
    (2 Reviews)
  • Weight0.4356 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the ERSE 1.0mH 18 AWG I Core Inductor Crossover Coil
in the Solid Core Inductor Crossover Coils product category.

Reviews

ERSE 1.0mH 18 AWG I Core Inductor Crossover Coil
ERSE 1.0mH 18 AWG I Core Inductor Crossover Coil is rated 4.5 out of 5 by 2.
Rated 5 out of 5 by from Don't let the picture scare youThese are very well made inductors, and with the help of an inductance meter very easy to unwind to create custom low DCR inductors when creating high efficiency designs.
Date published: 2013-08-02
Rated 4 out of 5 by from Excellent value, great performanceI had avoided this particular iron core inductor as it looked like it was of particularly low quality and poor construction. I had a project that needed a compact inductor of over 1mh with low dcr, and this was my best bet. I was truly suprised when I received the inductor, for the money, its very well constructed. This is essentially a steel laminate inductor, which I like quite a bit more than the typical ferrite core. The part required that I unwind a small amount to hit my target value, but I find this true of even the best inductors I have used. While probably within acceptable tolerances, the esr was a bit higher than expected, about 10% higher than specified.
Date published: 2008-08-17

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
ERSE 1.0mH 18 AWG I Core Inductor Crossover Coil

The schematic I have calls for a 1mH 16g. iron core. Can I safely substitute this 18g instead?

Asked by: djd8
As long as the value stays the same the only difference it will make is slightly higher DCR and slightly less power handling. If these aren't a problem, the 18 gauge will work fine as a replacement.
Answered by: MattP
Date published: 2014-08-22

Customer Projects

Customer projects that include: ERSE 1.0mH 18 AWG I Core Inductor Crossover Coil

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1