Eminence PXB2:800 2-Way Speaker Crossover Board 800 Hz

Brand:| Model: PXB2:800
Eminence pxb crossovers feature advanced circuit design to both preserve the crossover and your HF drivers.
  • Crossover type: Two-way, board only
  • Crossover frequency: 800 Hz, 18 dB/octave HP, 12 dB/octave LP
  • Power handling: 400 watts RMS
  • Made in the U.S.A.
Part # 
Weight: 1 lbs.  
Your Price
Part # 290-632
Qty:  EA
Available Payment Methods

Product Details

Eminence PXB2:800 2-Way Speaker Crossover Board 800 Hz
Eminence pxb board-only crossovers are a lower cost alternative to the "cabinet ready" models and are targeted specifically for custom cabinet projects as they do not include the terminal cup, input connectors or L-pad found on the "cabinet ready" models. They feature advanced circuit design to both preserve the crossover and your drivers. A benefit of the design is to form a voltage divider across the high frequency driver. The high-pass protection uses custom-built aerospace lamps. The tungsten filaments effectively track the program material, dynamically maintaining a safe maximum current level to the high frequency driver without introducing distortion. This circuitry provides smooth 3:1 analog compression during input overload conditions over 250 watts RMS. At full drive level approaching clipping, the electrical attenuation to the protected high frequency driver is -4.5 dB. In every way, Eminence pxb crossovers are a technically superior product. For use with 8 ohm drivers.

Product Specifications
  • Crossover Type2-Way
  • ConfigurationAssembled Board Only
Eminence PXB2:800 2-Way Speaker Crossover Board 800 Hz
  • BrandEminence Speaker
  • ModelPXB2:800
  • Part Number290-632
  • UPC876358001439
  • Product CategoryAssembled Passive Crossovers
  • Unit of MeasureEA
  • Product Rating
    (5 Reviews)
  • Weight1 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Eminence PXB2:800 2-Way Speaker Crossover Board 800 Hz
in the Assembled Passive Crossovers product category.


Eminence PXB2:800 2-Way Speaker Crossover Board 800 Hz
Eminence PXB2:800 2-Way Speaker Crossover Board 800 Hz is rated 4.2 out of 5 by 5.
Rated 5 out of 5 by from Eminence PXB2:800 2-Way Crossover Board 800 HzThese rock! They work particularly well for my ESS AMT-1 Speakers. Most impressive construction and quality.
Date published: 2013-07-31
Rated 5 out of 5 by from The Sound I've Been Looking For...This is a serious, SERIOUS crossover. I have this in an sound system that requires meticulous attention to the crossover frequency and the ability to handle the power thrown at it. I truly think the drivers will go before the crossover.Eminence knew what they were doing when they designed and built the PXB2-800. I've bought several of these for different units and I haven't had a bad experience yet. I'll continue buying these as long as they're available.Thanks, Parts Express for carrying professional level gear!
Date published: 2011-08-30
Rated 5 out of 5 by from Took 90 watts of power just fine.I converted my Leslie speaker cabinet that I use on stage in my rock and roll band to 8 ohms and used this crossover being pushed by a 90 watt solid state Leslie amp and it did great. Sounded as good as the normal set up and took the loud power at a gig just fine and clear. I'm well pleased and will buy more of them.
Date published: 2009-02-10
Rated 1 out of 5 by from PXB2 800 CrossoverThis crossover does not work properly. The speaker cabinets do not put out bass like the should with this crossover installed.
Date published: 2008-04-28
Rated 5 out of 5 by from Serious, Profesional Quality product!These cross overs are built for serious use. These are not cheapies. There is tweeter protection that kicks in over 90 watts or so, wether the "blurb" tells you or not. Of course, most tweeters will have blown up or burned out long before 90 watts! These are made for use by musicians who tend to "rock out" and destroy the average leven of product. These units are survivors, even in extreme conditions. I have two different models crossing over at 800 and 2500 Hz. I am of the "buy the best and forget about it" school of speaker building. These will survive anything you throw at them. If your speaker system goes silent, it's not a crossover problem!
Date published: 2007-10-25
  • 2015-04-21T07:04CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_290-632, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Eminence PXB2:800 2-Way Speaker Crossover Board 800 Hz

I have a pair of ESS AMT-1 speakers and have replaced the Heil diaphrams with new (4 ohm) from ESS. Existing woofers measure 6 ohms. Is there a 4 ohm version of this crossover and / or can it be used with this configuration?

Asked by: Michaelai2
Unfortunately we do not have a 4 ohm crossover that will have a crossover point this low, the lowest we have available is 2kHz.
Answered by: MattP
Date published: 2015-03-24

Eminence PXB2:800 2-Way Speaker Crossover Board 800 Hz Eminence PXB2:5K0 2-Way Speaker Crossover Board 5,000 Hz I want to buy the best, which one is the be?

Asked by: javier2460
These crossovers all use the same quality components. The best will be determined by the specific drivers you are using. Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2015-01-12

Hello, i have a pair of floorstand speakers (8Ω), will be to connect with AMT tweeters(4Ω), Can i use 4Ω version of PXB2 between them? Because i will use the same PXB2 on other 2way 4Ω speakers project later, many thanks.

Asked by: partsnewbie
Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2014-09-12

Is it possible to add an L pad for high frequency attenuation.  I would like to use these with Altec 416-8A and 802-8A drivers in a Altec designed Hi-Fi box.  

Asked by: skyboltone
Yes you can add an L-pad between the crossover and the driver.
Answered by: MattP
Date published: 2014-06-19

Will this crossover work appropriately for a 16 ohm 2-way? Using a pair of 15 in. Stephens woofers and Altec Lansing horns (midrange + tweeter)

Asked by: Buzzy
This crossover is intended to work with 8 ohm loads and the crossover point would not be the same with different impedance.
Answered by: Chrisf
Date published: 2014-06-06

On this Crossover Eminence PXB2:800 2-Way. The 800 hz is that mean the frequency that going to the woofer or to the tweeter?

I'm trying to build a speaker system and I'm also trying to find out the crossover. How do I find out on a crossover what frequency or how many Hz is going to the woofer, midrange, and tweeter so I can best match my woofers, and tweeter. I'm planning on three way but I'm thinking more toward two way to save some money. Please help. Thanks
Asked by: jgoff
This crossover will send 800 and down to the woofer , and 800 and above to the tweeter.
Answered by: Chrisf
Date published: 2014-03-27
  • 2015-04-20T09:24CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_290-632, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Customer Projects

Customer projects that include: Eminence PXB2:800 2-Way Speaker Crossover Board 800 Hz

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1996-2015 Parts Express, All Rights Reserved

Live Chat Software