Eminence PXB2:5K0 2-Way Speaker Crossover Board 5,000 Hz

Brand:| Model: PXB2:5K0
Eminence pxb crossovers feature advanced circuit design to both preserve the crossover and your HF drivers.
  • Crossover type: Two-way, board only
  • Crossover frequency: 5,000 Hz, 18 dB/octave HP, 12 dB/octave LP
  • Power handling: 400 watts RMS
  • Made in the U.S.A.
Part # 
Weight: 1 lbs.  
List Price$44.99
You Save11%
Your Price
Part # 290-638
Qty:  EA
Available Payment Methods

Product Details

Eminence PXB2:5K0 2-Way Speaker Crossover Board 5,000 Hz
Eminence pxb board-only crossovers are a lower cost alternative to the "cabinet ready" models and are targeted specifically for custom cabinet projects as they do not include the terminal cup, input connectors or L-pad found on the "cabinet ready" models. They feature advanced circuit design to both preserve the crossover and your drivers. A benefit of the design is to form a voltage divider across the high frequency driver. The high-pass protection uses custom-built aerospace lamps. The tungsten filaments effectively track the program material, dynamically maintaining a safe maximum current level to the high frequency driver without introducing distortion. This circuitry provides smooth 3:1 analog compression during input overload conditions over 250 watts RMS. At full drive level approaching clipping, the electrical attenuation to the protected high frequency driver is -4.5 dB. In every way, Eminence pxb crossovers are a technically superior product. For use with 8 ohm drivers.

Product Specifications
  • Crossover Type2-Way
  • ConfigurationAssembled Board Only
Eminence PXB2:5K0 2-Way Speaker Crossover Board 5,000 Hz
  • BrandEminence Speaker
  • ModelPXB2:5K0
  • Part Number290-638
  • UPC876358001460
  • Product CategoryAssembled Passive Crossovers
  • Unit of MeasureEA
  • Product Rating
    (4 Reviews)
  • Weight1 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Eminence PXB2:5K0 2-Way Speaker Crossover Board 5,000 Hz
in the Assembled Passive Crossovers product category.


Eminence PXB2:5K0 2-Way Speaker Crossover Board 5,000 Hz
Eminence PXB2:5K0 2-Way Speaker Crossover Board 5,000 Hz is rated 4.25 out of 5 by 4.
Rated 5 out of 5 by from Works greatI bought these to replace a cheaper x-over as I was having problems with blow tweeters. These have an 18db slope for the tweeter and two elements to absorb excess peaks of power to the tweeter. They solved my problem
Date published: 2014-03-18
Date published: 2009-04-28
Rated 4 out of 5 by from VERY GOOD PERFORMANCE FOR THE PRICEI used this piece to replace the blown network in a brand name unit I have. The install was easy and simple and the power handling was great. I'll recommend this piece to anyone.
Date published: 2008-05-31
Rated 4 out of 5 by from High quality, low priceIn rares systems you will find the caracteristics fo this. Great capacity, high performance and low price. Though your sound, im not very convince. The crossover are working with a Selenium D210Ti drive, and the trumpet, violas, keyboards and other mid sound is not presence. The high sounds above 1 khz are clearly and strongh. Even yet the sound is armony and beautiful.
Date published: 2007-10-18
  • 2015-05-27T06:43CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_290-638, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Eminence PXB2:5K0 2-Way Speaker Crossover Board 5,000 Hz

When you say board only, does this mean it doesn't come with capacitors and coils.

Asked by: squidley
This item comes as pictured with caps and coils. "Board only" means it is not attached to a terminal plate like some of our cabinet-ready crossovers.
Answered by: MattP
Date published: 2015-02-24

What is the designed speaker load in ohms of Eminence PXB2:5K0 2-way crossover and what happens if connected speaker load is half the recommended ohm value?

Asked by: Shed
All Eminence crossovers are designed for 8 ohm loads. The If a 4 or 16 ohm load is connected, the crossover point will shift and the "knee" of the slope will change.
Answered by: MattP
Date published: 2014-10-20
  • 2015-05-27T09:27CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_290-638, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Customer Projects

Customer projects that include: Eminence PXB2:5K0 2-Way Speaker Crossover Board 5,000 Hz

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1996-2015 Parts Express, All Rights Reserved

Live Chat Software