Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
Eminence PXB2:2K5CX 2-Way Speaker Crossover Board 2,500 Hz
Would this crossover be good for a Eurolive P1220F floor monitor designed by Behringer?
my vocopro SV500 crossover broke.... the spec if max-power output: 250W peak impedance: 8 ohms sensitivity 90db frequency response 20hz-25khz Can this cross over be used to replace the vocopro crossover?
Please contact our tech support for more help with this question, firstname.lastname@example.org or 800-338-0531 x1.
Date published: 2015-04-28
Can I use this to replace blown crossover in jbl control 29 speakers. Running in 8 ohm not using transformer taps
Yes. The Control 29AV use a crossover at 2.5kHz at 3rd order. The Eminence Crossover is a 12dB per octave slope ( 2nd order) at 2.5KHz at 250Watts.
Date published: 2014-09-30
Can I use this to replace the x-over in an older Definitive Technology center speaker model CLR? It distorted badly until I only ran the woofer directly from the amp then no more distortion.
Unfortunately without knowing the original crossover points I cannot recommend a replacement. Anything off the shelf will change the sound of the speaker, you may consider trying to get the original repaired first.
Date published: 2014-09-12
Does anyone know if I can use this crossover for a cabinet containing a compression tweeter and two 15" woofers? My cabinet is the older Kustom 2X15 pa Cabinets KCS215. It's a 4ohm cabinet
Unfortunately this crossover is only designed to work with 8 ohm loads. You may want to consider part number 260-142 which has a jumper for 4 ohm woofer loads.
Date published: 2014-07-11
If I use an 8 ohm woofer and an 8 ohm horn driver, what is the load?
The crossover separates the drivers so it is a 8 ohm load overall.
Date published: 2014-04-14