290-600_ALT_1.jpg
290-600_ALT_1.jpg
 
290-600_ALT_0
 
290-600_ALT_1
 

Eminence PXB:1K6 High Pass Crossover Board 1,600 Hz

Brand:| Model: PXB:1K6
Overview
Eminence pxb crossovers feature advanced circuit design to both preserve the crossover and your HF drivers.
Highlights
  • Crossover type: High pass, board only
  • High pass frequency: 1,600 Hz, 18 dB/octave
  • Power handling: 400 watts RMS
  • Made in the U.S.A.
Part # 
290-600
Weight: 1 lbs.  
IN STOCK
List Price$29.99
You Save16%
Your Price
$24.99
Part # 290-600
Qty:  EA
Available Payment Methods

Product Details

Eminence PXB:1K6 High Pass Crossover Board 1,600 Hz
Eminence pxb board-only crossovers are a lower cost alternative to the "cabinet ready" models and are targeted specifically for custom cabinet projects as they do not include the terminal cup, input connectors or L-pad found on the "cabinet ready" models. They feature advanced circuit design to both preserve the crossover and your drivers. A benefit of the design is to form a voltage divider across the high frequency driver. The high-pass protection uses custom-built aerospace lamps. The tungsten filaments effectively track the program material, dynamically maintaining a safe maximum current level to the high frequency driver without introducing distortion. This circuitry provides smooth 3:1 analog compression during input overload conditions over 250 watts RMS. At full drive level approaching clipping, the electrical attenuation to the protected high frequency driver is -4.5 dB. In every way, Eminence pxb crossovers are a technically superior product. For use with 8 ohm drivers.


Product Specifications
  • Crossover TypeHigh Pass
  • ConfigurationBoard Only
Eminence PXB:1K6 High Pass Crossover Board 1,600 Hz
  • BrandEminence Speaker
  • ModelPXB:1K6
  • Part Number290-600
  • UPC876358001545
  • Product CategoryAssembled Passive Crossovers
  • Unit of MeasureEA
  • Product Rating
    (3 Reviews)
  • Weight1 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Eminence PXB:1K6 High Pass Crossover Board 1,600 Hz
in the Assembled Passive Crossovers product category.

Reviews

Eminence PXB:1K6 High Pass Crossover Board 1,600 Hz
Eminence PXB:1K6 High Pass Crossover Board 1,600 Hz is rated 4.6667 out of 5 by 3.
Rated 5 out of 5 by from Great upgrade!Ik bought 2 of the Xovers to install in a pair of peavey monitors(old from the 70's) that came from the factory with piezos. I installed 4x10 horn with some selenium drivers. What an impressive upgrade! I placed them in front of the bass port so I could see if I was I driving them too hard. Well! It took outside concert level volume to get the bulbs to even flicker. At night, you can see it best. All in all a great Xover at any price. Will upgrade all of my cabs as needed. By the way ,these are very close to the crossovers they put in the JBL Caberat cabs in the 90's. As per usuall PE sent them fast and easy. Thankx Parts Express!
Date published: 2014-08-02
Rated 4 out of 5 by from 16K CrossoverSeems like a good crossover only wish they would have included a diagram of recommended installation in a 2 way system!
Date published: 2013-10-03
Rated 5 out of 5 by from VERY BEEFY,GREAT SOUND AND GOOD POWER HANDLINGI PURCHASED A PAIR OF THESE TO REPLACE MY OLD TECHNICS CROSSOVERS I HAD,I INSTALLED THEM AND PUT THEM TO THE TEST AND I WAS NOT DISAPPOINTED,GREAT SOUND COMING FROM MY TWEETERS NOW,WATCHING MOVIES OR LISTENING TO MUSIC,I HAVE 2 CABINETS WITH A PYLE DRIVER PRO 4 OHM LOUDSPEAKER AND DUAL BULLET TWEETERS EACH,TWEETERS ARE 4 OHM EACH WHICH I WIRED IN SERIES FOR 8 OHM EACH PAIR ON EACH CABINET,BECAUSE THE CROSSOVERS ARE FOR 8 OHM DRIVERS.IF YOU NEED A GREAT HIGH PASS ONLY CROSSOVER FOR YOUR TWEETERS,GO WITH THESE
Date published: 2013-04-05

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Eminence PXB:1K6 High Pass Crossover Board 1,600 Hz

Can I use a 16 ohm driver with this crossover and if I can will it remain a 16 ohm load across the output on the amp? Or will it be an 8 ohm load across the output on the amp?

Asked by: terryn
A 16 ohm driver would still present a 16 ohm load to the amp , but since the crossover is intended for 8 ohm loads it would change the crossover point.
Answered by: Chrisf
Date published: 2014-03-11

Customer Projects

Customer projects that include: Eminence PXB:1K6 High Pass Crossover Board 1,600 Hz

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1