Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email firstname.lastname@example.org
for a prompt reply.
Eminence PSD:2002S-8 1" Titanium Driver 8 Ohm 1-3/8"-18
Hi I'm looking for a blown yamaha dxr 12 horn. Do you have a replacement? Thanks.
I am not familiar with the horn used in that speaker but as long as this will physically fit and it si a spin on type, this should work in most applications where a 1 inch would be used.
Date published: 2016-02-05
I need a powerful horn driver for high frequencies that will match with high powered bass and midbbass drivers, which driver would offer the highest frequency range extension? (Brightest sound)
Please contact our tech support for more help with this question, email@example.com or 800-338-0531 x1.
Date published: 2015-03-16
What would you recommend as an upgrade to the stock Peavey RX14 drivers. These or the Seleniums?
Either option will work well, the Selenium D220Ti drivers are the most popular replacement options for most OEM horn drivers.
Date published: 2015-02-17
It looks like this can be screw mounted to the Beta 12cx coax driver. Is this a good match? What should the crossover point be?
These will work with the Beta CX drivers, I would recommend a crossover point around 2.5kHz.
Date published: 2014-05-15
Suitable replacement horn driver for JRX115 Cab?
Hi there,Would you guys recommend this or the Selenium D220Ti as a replacement in a JBL JRX115 Cab? The JRX crossover is set to 1.6 kHz, which matches this horn, and the D220Ti recommends 2 kHz. I'm looking for a nice balanced sound and avoid ear piercing highs.Thanks
Either driver will be a great upgrade, the Selenium is much more popular.
Date published: 2013-05-25
Looking to replace a blown EV DH3/2010A, would this be best?
"Best" is subject to opinion, so I cannot say that this (or any other driver) would be the "best" replacement for you. Eminence does make a good quality product, if the driver you're replacing is a metallic dome, 1" throat, 1-3/8" thread-in driver, then this would be suitable to replace it.
Date published: 2011-05-02