Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
Eminence PSD:2002-16DIA Diaphragm For PSD:2002 16 Ohm
I have 8 ohm eminence HF drivers coupled with 16 ohm woofers and they are way too sensitive and loud, event with an attenuater. Could I replace with 16 ohm diaphrams and then have 16 ohm horns?
Yes the PSD:2002 drivers will work with either 8 or 16 ohm diaphragms.
Date published: 2015-10-30
I have a pair of Carvin TR1503 speakers and I need new diaphragm's for the horns the carvin part number is DH1100 would these diaphragm's work for replacement as well ?
We do not have a cross reference available for this type of thing. Please contact our tech support for more help with this question, firstname.lastname@example.org or 800-338-0531 x1.
Date published: 2015-05-21
My Carvin 1584 HF horn isn't working. Ohms check on the disconnected wire leads show infinity resistance but the diaphram windings looks fine. Is the diaphram bad?
It is, yes. An open voice coil sometimes can only be identified by measuring its nominal resistance.
Date published: 2014-06-03
Is this a replacement for a Jay 20610 diaphragm? This is what I'm told is in my Yamaha S115IVS speakers.
Yes this is the correct diaphragm for that driver.
Date published: 2014-01-20
Will this replace the driver on a Carvin HF1000 16 ohm?
I have bad horns in a set of Carvin 1232 floor monitors. Will this driver fit? All the back of the driver says is Carvin HF1000 16 ohms.
Unfortunately no this will not work as a replacement diaphragm. We do not have appropriate diaphragms for this driver, I would recommend something like the Selenium D220Ti as a replacement.
Date published: 2013-09-15