Eminence Legend BP102 10" Bass Guitar Driver 200W 8 Ohm

Brand:|Model: Legend BP102
The Legend BP102 has been a staple product for many bass guitar wonders over the past 10 years. This is a favorite for 3x, 4x, and 8x10 cabinets!
In Stock
Your Price
Part # 290-471
  • Recommended for bass guitar applications in a sealed or vented enclosure
  • Works well in single or multi-driver designs

Product Details

Eminence Legend BP102 10" Bass Guitar Driver 200W 8 Ohm

The Legend BP102 has been a staple product for many bass guitar wonders over the past 10 years. This is a favorite for 3x, 4x, and 8x10 cabinets! Don't let the sensitivity fool you, this speaker will really punch out the bass with authority. It also works great as a mid in PA applications or in a three-way bass cabinet. Made in the USA. 7-year manufacturer's warranty!

Specifications: • Power handling: 200 watts RMS • VCdia: 2" • Impedance: 8 ohms • Frequency range: 40-2,000 Hz • Sensitivity: 92 dB 1W/1m • Magnet weight: 38 oz. • Dimensions: Overall diameter: 10.08", Cutout diameter: 9.05", Depth: 4.25".

No other speaker is used more widely as standard equipment in guitar and bass guitar amplifiers than Eminence! Most guitar speaker manufacturers are well known for a specific type of tone. Indeed Eminence is recognized for establishing the "American" rock, country, and blues tones. What really sets Eminence apart though is the ability to provide the guitarist with virtually any tone they desire! Rock, Metal, Country, Blues, British, Rap, Soul, and Alternative styles can be provided with one of the Legend models available. If you're not packing a Legend, you're probably not playing like one!

Product Specifications
  • TypeBass Guitar
  • Nominal Diameter10"
  • Impedance8 ohms
  • Power Handling (RMS)200 Watts
  • Magnet MaterialCeramic Ferrite
Eminence Legend BP102 10" Bass Guitar Driver 200W 8 Ohm
  • BrandEminence Speaker
  • ModelLegend BP102
  • Part Number290-471
  • UPC876358000852
  • Product CategoryGuitar Speakers & Bass Guitar Speakers
  • Unit of MeasureEA
  • Product Rating
    (28 Reviews)
  • Weight8.8 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Eminence Legend BP102 10" Bass Guitar Driver 200W 8 Ohm
in the Guitar Speakers & Bass Guitar Speakers product category.


Eminence Legend BP102 10" Bass Guitar Driver 200W 8 Ohm
Eminence Legend BP102 10" Bass Guitar Driver 200W 8 Ohm is rated 4.8214 out of 5 by 28.
Rated 5 out of 5 by from A good speakerThis speaker came well packaged in a box inside another box. It wws in perfect condition. I installed it in the.bass player's amp and it performed well at our next rehearsal.If he blows another speaker, I will replace it with another one like this.
Date published: 2015-04-09
Rated 5 out of 5 by from Punchy Patorius ProducedLove these speaks. Got 'em a week or so ago, and plopped them in my homemade 2-10 cab. They deliver punchy, creamy tones over the entire 4-string range. Sign me up for a lifetime supply.
Date published: 2015-02-10
Rated 5 out of 5 by from It's name is the truth it is legendary!These were purchased to load the mid-bass section of a bass guitar cabinet. In this application I followed the Eminence instructions for a small sealed enclosure and then tuned using poly fill from PE.I have also used these in BFM designed cabinets.This is a VERY versatile driver. It sounds and performs well in all of the applications in which I have utilized it.
Date published: 2012-07-09
Rated 5 out of 5 by from Replacements in Carvin B210 CabinetI replaced the stock speakers in my Carvin B210 cabinet with Legend BP102s. They are very warm sounding and not overly colored like some British guitar speakers. A fine match for my setup with great clean sounds. It has been two years without any problem.
Date published: 2011-11-12
Rated 5 out of 5 by from Correct SVT-line replacement speakerThis is the correct speaker to replace a fried driver from an SVT210HE cab, and probably the other configurations as well, but I don't have one so I didn't research that. However, the speaker mass is up a little from the original spec, so I replaced the pair, not a single speaker. I'm not sure this was necessary, but that's what I did. The result was a happy, thumpin' SVT210HE back to life.
Date published: 2010-01-25
Rated 5 out of 5 by from Performance and ValueThis is the goods. For the price of Chinese junk, Eminence offers a quality driver that delivers. I replaced the original 4 10" in an old tube Fender Bassman 10 combo and it completely transformed the amp. The Bassman 10 was never taken seriously as a bass amp and that was a mistake; with the right drivers (the BP102) it has the low end extension and transient attack to get the job done even if underpowered for bigger venues. Some say the BP102 is not efficient (based on pubished numbers, I suppose), but that is just a misunderstanding of how efficiency is measured. These drivers put out more low frequency energy per watt than any other 10" bass guitar driver I've looked at. Eminence just doesn't cheat the spec by picking the peak output frequency vs. the average over the useful range. This is the driver you want.
Date published: 2009-12-07
  • 2015-12-01T06:36CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_en_US, sid_290-471, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Eminence Legend BP102 10" Bass Guitar Driver 200W 8 Ohm

hi, do you ship to australia? thanks

Asked by: igorg
Please contact our sales and customer service for available stock, price and shipping options. sales@parts-express.com or 800-338-0531 x2.
Answered by: MattP
Date published: 2015-05-18

what speaker would you suggest for a g k 4 ten cab its a gold line cab.  

Asked by: deano13
Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2015-02-23

How should I wire up a 4x10 cabinet with these speakers to get a 4ohm load?

Asked by: 4Low
You will have to wire these in series/parallel in order to get back to a 4 ohm load. See the diagram below.
Answered by: MattP
Date published: 2015-07-08

4 or 8 ohm???

Have Eden Metro DC-210XLT. Speakers are shot. Original wiring is 2x4 ohms in series for 8 ohm load, 300 watts. Amp can handle 4 ohm load for 550 watts, so I'm thinking of 2x8 ohms in parallel - Eminence BP102's.Sound OK?
Asked by: furchtlos
This speaker is 8 ohms, so yes, two of them wired in parallel would present a 4 ohm load to your amplifier.
Answered by: RussR
Date published: 2012-08-08
  • 2015-12-01T07:20CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_290-471, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Get Sales Flyer
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1986-2015 Parts Express, All Rights Reserved

Live Chat Software