Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email firstname.lastname@example.org
for a prompt reply.
Eminence Delta-12A 12" Driver 8 Ohm
What is the diameter of this speaker from hole center to hole center ?
The mounting holes on this are 11.59", or 294.3mm on center.
Date published: 2015-01-19
I'm looking for a replacement woofer for a PAS T1200 PA speaker, part# TS-1280C. Would this be a good fit? Or what would you recommend? Here are the specs: Frequency range: 60 Hz to 20 kHz Power Handling: 200 Watts, 800 Watts peak Impedance: 8 ohms
Actual range for the woofer would be 60 Hz to 3 kHz. Will appreciate any feedback, thanks.
Date published: 2014-09-09
Would this driver be a good replacement for a cerwin vega atw 12? I'm rebuilding a pair of At 008764 cerwin vega 3 way speakers. Thanks for the help in advance!
This is aimed more for a pro audio application. The woofer we recommend for the ATW-12 replacement is the Series II below.http://www.parts-express.com/dayton-audio-st305-8-12-series-ii-woofer--295-120
Date published: 2014-08-05
Optimum Cabinate Size?
what would be best to support bottom utilizing this speaker as a sub? Thanks for the help.Larry
In the information area on the product page - download Eminence Delta 12A Suggested Cabinet Design. It's a good starting point. From there, if you don't like he resulting performance - you can use a box calculator to see other options. Often - you will have a goal and after using a box calculator will find that the driver you want doesn't fill the bill. This is where you do your homework.. Have fun !!!
Date published: 2012-05-04