Electronic Solder 60/40 .031" 1 lb. Spool

Electronic Solder 60/40 0.8mm (0.031") Diameter 1 lb. Spool

Overview
High quality solder for electronic and electrical work. 60% tin and 40% lead with rosin flux in the core for a strong, long lasting bond. Diameter: .031". 1 lb. spool.
Part # 
370-032
Weight: 1 lbs.  
IN STOCK
List Price$35.99
You Save34%
Your Price
$23.49
Buy 4-19 $19.70
Buy 20-up$19.00
Part # 370-032
Qty:  EA
Available Payment Methods

Product Details

Electronic Solder 60/40 0.8mm (0.031") Diameter 1 lb. Spool

High quality solder for electronic and electrical work. 60% tin and 40% lead with rosin flux in the core for a strong, long lasting bond. Diameter: .031". 1 lb. spool.



Electronic Solder 60/40 0.8mm (0.031") Diameter 1 lb. Spool
  • BrandParts Express
  • Part Number370-032
  • UPC844632015540
  • Product CategorySolder
  • Unit of MeasureEA
  • Product Rating
    (17 Reviews)
  • Weight1 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Electronic Solder 60/40 0.8mm (0.031") Diameter 1 lb. Spool
in the Solder product category.

Reviews

Electronic Solder 60/40 0.8mm (0.031") Diameter 1 lb. Spool
Electronic Solder 60/40 0.8mm (0.031") Diameter 1 lb. Spool is rated 4.4706 out of 5 by 17.
Rated 5 out of 5 by from Great work!I've used Parts Express several times over the years. The experience has always been fabulous! Great products, fast shipping, wonderful prices. I couldn't be more impressed! Keep up the good work!!
Date published: 2013-02-02
Rated 5 out of 5 by from Electronic Solder 60/40 .031" 1 lb. Spoolsolder worked as advertised. Good flow easy to work with, and at a good price.
Date published: 2013-02-01
Rated 5 out of 5 by from great stuffdid just what I wanted. Low melting point easy to use
Date published: 2012-12-29
Rated 4 out of 5 by from Thin and quickHave you ever wondered why solder smoke will always go in your eye. It doesn't matter if you lay upside down or run around the room. That smoke is always going to find a way to your eyeballs. Wierd. Good thing this solder melts so fast and is thin for doing smaller tasks. My Weller 35 will burn the flux quick if I'm not speedy enough, but this solder seems to stick well and soak in good.
Date published: 2011-10-04
Rated 5 out of 5 by from Don't overheatWorks well. It works better with a termperature controlled soldering iron. The flux will burn if the iron is too hot. This doesn't hurt anything, but doesn't look good.
Date published: 2010-12-06
Rated 5 out of 5 by from Works. Great value.Flows in very well due to its lower melting point and its aggressive flux. You may have to clean up some flux here and there but thats because it does its job.(if your flux looks dirty its probably because it pulled that junk off your substrates)
Date published:
Rated 4 out of 5 by from Good diameter for smaller workThis is good for newer electronics pcb's where the components are very small and compact on the board. If you are working with older, vintage electronics such as PTP stuff- you may want to opt for a larger diameter...
Date published: 2008-06-26
Rated 4 out of 5 by from good valuesolder is good quality/value for the money
Date published: 2008-04-13
Rated 4 out of 5 by from good price good solderget alot of solder for the price. it really works good. i will buy more when i run out.
Date published: 2008-03-23
Rated 4 out of 5 by from buy thisI have used about two pounds of this product and have had no problems or cold joints. The flux works excellent under proper temperature conditions and sticks to about everything. The nicest thing is that it has a very low melting point for this type of solder.
Date published: 2007-09-19
Rated 3 out of 5 by from OK for amateur useGood for the hobbiest only.
Date published: 2007-06-28

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Electronic Solder 60/40 0.8mm (0.031") Diameter 1 lb. Spool

Customer Projects

Customer projects that include: Electronic Solder 60/40 0.8mm (0.031") Diameter 1 lb. Spool

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1