Parts Express Free Shipping at 98 Dollars

Clearance Item
182-564_ALT_4.jpg
182-564_ALT_4.jpg
 
182-564_ALT_0
 
182-564_ALT_1
 
182-564_ALT_4
 

Electroline EDA 2800 8-port RF/CATV Distribution Amplifier

Brand:| Model: EDA2800
Overview
Maximize the performance of your off-air/cable distribution network with an Electroline EDA 2800 amplifier. The EDA 2800 is designed to boost an incoming signal by 4 dB over 8 ports.
Highlights
  • Waterproof housing and SCTE compliant 360° F-terminals
  • Industry benchmark low-noise amplifier design
  • Rated at IEEE 6 kV 3 kA combination wave standard
  • Short-circuit protected wall adapter
  • 10-year manufacturer's warranty
Part # 
182-564
Weight: 2.44 lbs.  
This Product Is No Longer Available
Comparable Items Can Be Found Here:
Available Payment Methods

Product Details

Electroline EDA 2800 8-port RF/CATV Distribution Amplifier

Maximize the performance of your off-air/cable distribution network with an Electroline EDA 2800 amplifier. The EDA 2800 is designed to boost an incoming analog and digital off-air signals, as well as CATV signal by 4 dB over 8 ports. Expect nothing but the highest quality signal combined with the most reliable performance. The EDA 2400 features an industry benchmark for low noise at 3 dB, and the extra surge protection (XSP) has been rated at the IEEE 6 kV 3 kA combination wave standard for enhanced lightning protection. This test injects 35 times more energy than the level found in previous models, and guarantees durability that will stand the test of time. A waterproof housing and SCTE compliant 360° F-terminals ensure a nearly indestructible design, as do short-circuit protected wall adapters. Power verification is provided by a built-in confirmation LED. 10-year manufacturer's warranty.

Features and Specifications: • Number of ports: 8 • Forward gain: 4 dB • Return path insertion loss: 10.5 dB • Forward passband: 54-1000 MHz • Return passband: 5-65 MHz • Frequency response flatness: ±1 dB • Noise figure: 3 dB • RFI isolation: 100 dB minimum • Surge protection (IEEE C62.41-1991, all ports) ring wave: 6 kV, 500 A, loc. B3, combination wave: 6 kV, 3 kA, loc. B3 • Operating temperature: -40°F to 140°F (-40°C to +60°C).



Electroline EDA 2800 8-port RF/CATV Distribution Amplifier
  • BrandElectroline
  • ModelEDA2800
  • Part Number182-564
  • UPC853016001086
  • Product CategoryRF Distribution / Amplifiers
  • Unit of MeasureEA
  • Product Rating
    (2 Reviews)
  • Weight2.44 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Electroline EDA 2800 8-port RF/CATV Distribution Amplifier
in the RF Distribution / Amplifiers product category.

Reviews

Electroline EDA 2800 8-port RF/CATV Distribution Amplifier
Electroline EDA 2800 8-port RF/CATV Distribution Amplifier is rated 4.5 out of 5 by 2.
Rated 5 out of 5 by from Dose the job it's intended to do - Very Well!!I’m a facility manager of a small hospital that has over 27 TVs in the various patient rooms. The original 28 year old cabling was suffering from interference from the modern wireless networking and various new pieces of medical equipment as well as age. The old system had 8 cable runs of old standard RG6 cable from the cable DMARK and in series between the TV’s were splitters with jumpers to each TV set. The TV quality was so poor that a number of channels were not even showing up on the TV’s at the end of the runs except for pure snow. I was able to cut the 8 separate cable runs down to just 4 runs of RG6 quad shielded cable with an EDA 2800 Drop Amp splitters/amplifiers on the end of each main run and then from the 8 ports on the drop amp I ran a quad shielded cable directly to the individual TV in the patient rooms. I got rid of all the little splitters and old cable. After all this our TV reception is excellent. All channels are clear and have a perfect picture. I even have extra ports left over in case we need to add a few more TV’s later on to other areas. Our patients and I are very pleased with the results.
Date published: 2013-05-27
Rated 4 out of 5 by from Performs like a dream if conditions are right...Spend lots of time researching whether an Active Splitter or an Amplifier is right for me. With 8 splits in my home an Amplifier if what I chose. Now for those who are not familiar with this Amplifier splitters. They fuction as signal booster. This means if you have any noise or bad signal to begin with you will make things worse. As in my case I have replaced all existing cable runs with all new RG6 coax all the way to the Tap. My signal was an amazing +10db. But no matter how good the singal was splitting it 8 way will degrade it severly. This Amplifier maintain my signals wonderfully and all my channels are crystal clear, even lower channels.
Date published: 2011-02-17

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Electroline EDA 2800 8-port RF/CATV Distribution Amplifier

Customer Projects

Customer projects that include: Electroline EDA 2800 8-port RF/CATV Distribution Amplifier

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1