Dayton Audio XO3W-700/5.6K 3-Way Crossover 700/5,600 Hz

Dayton Audio XO3W-700/5.6K 3-Way Speaker Crossover 700/5,600 Hz

Brand:| Model: XO3W-700/5.6K
Overview
These 3-way, 2nd-order (12 dB/octave) crossovers were designed with a 3 octave spread between crossover points. Dayton Audio metallized polyester film capacitors are used in critical midrange and tweeter signal paths. 18 gauge tweeter and midrange inductors, and 20 gauge woofer inductors are used to keep DC resistance to a minimum.
Highlights
  • Designed with a 3 octave spread between crossover points
  • Metallized polyester filmcapacitors are used in the critical midrange and tweeter signal paths
  • Low-pass section allows for the use of 4 or 8 ohm woofers
Part # 
260-156
Weight: 3 lbs.  
IN STOCK
List Price$72.99
You Save21%
Your Price
$57.34
Buy 6-up$54.60
Part # 260-156
Qty:  EA
Available Payment Methods

Product Details

Dayton Audio XO3W-700/5.6K 3-Way Speaker Crossover 700/5,600 Hz

These 3-way, 2nd-order (12 dB/octave) crossovers were designed with a 3 octave spread between crossover points. Dayton Audio metallized polyester film capacitors are used in the critical midrange and tweeter signal paths. 18 gauge tweeter and midrange inductors, and 20 gauge woofer inductors are used to keep DC resistance to a minimum. A unique design feature of the low-pass section allows for the use of 4 or 8 ohm woofers, perfect for building a multi woofer system. The midrange and high-pass sections are rated for an 8 ohm load. All components are glued or fastened down to eliminate buzzing and vibrations. The high quality blue PC board uses a back plate for added rigidity and eyelet holes for easy mounting. Available in a variety of crossover points. 300W power handling. Board measures: 11-3/8" W x 4-3/8" H x 2" D. Terminals are 0.205".



Product Specifications
  • Crossover Type3-Way
  • ConfigurationAssembled Board Only
Dayton Audio XO3W-700/5.6K 3-Way Speaker Crossover 700/5,600 Hz
  • BrandDayton Audio
  • ModelXO3W-700/5.6K
  • Part Number260-156
  • UPC844632045233
  • Product CategoryAssembled Passive Crossovers
  • Unit of MeasureEA
  • Product Rating
    (12 Reviews)
  • Weight3 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Dayton Audio XO3W-700/5.6K 3-Way Speaker Crossover 700/5,600 Hz
in the Assembled Passive Crossovers product category.

Reviews

Dayton Audio XO3W-700/5.6K 3-Way Speaker Crossover 700/5,600 Hz
Dayton Audio XO3W-700/5.6K 3-Way Speaker Crossover 700/5,600 Hz is rated 4.75 out of 5 by 12.
Rated 5 out of 5 by from high power crossoverThese are well built crossovers
Date published: 2008-11-05
Rated 4 out of 5 by from Great little 3 way.I used this in a 3 way with a dayton reference woofer and midrange, and a hi-vi planar tweeter. I'm sure it has room to perform better and use better components, but I doubt that it would make a huge difference in the end.
Date published: 2008-09-20
Rated 5 out of 5 by from Very good productI purchased 2 crossovers to replace my old ones. It is used with pair of Altec Lansing 15" bass, Altec Lansing mid-range horns and Electro voice tweeter horns. The system performance is now much improved, a very good crossover. I can find nothing negative about it. I can recommend it with out reservation.
Date published: 2008-04-03
Rated 4 out of 5 by from Well made and extremely tightTwo of these 3-way units were purchased as replacements for ailing OEM units. The selectable base impedance makes matching very easy. After insuring all drivers were at their peak capabilities the speaker systems were put through the paces. The crossovers performed very well and were found to be extremely tight. The sound was incredible with no distortion or bleeding. Base resonance was right on the money allowing for exact tuning of the cabinets, midrange was right on the money as well, and highs were unbelievable. A must have for any audiofile.OEM
Date published: 2008-02-25
Rated 5 out of 5 by from Quality CrossoverThis is a well-built, hefty crossover. Works well and looks so nice I hated to mount it inside the cabinet.
Date published: 2008-02-24
Rated 5 out of 5 by from Worth every pennyVery balanced output. The 4ohm/8ohm option adds to its flexibility. Seemless transitions between drivers. These replaced pretty decent crossovers so the difference isn't stark. Sound is great. Seemless and balanced really is the best two words to describe them. Great value being pre-built.
Date published: 2008-02-15
  • 2015-04-26T07:16CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_260-156, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Dayton Audio XO3W-700/5.6K 3-Way Speaker Crossover 700/5,600 Hz

Customer Projects

Customer projects that include: Dayton Audio XO3W-700/5.6K 3-Way Speaker Crossover 700/5,600 Hz

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1996-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software