Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email firstname.lastname@example.org
for a prompt reply.
Dayton Audio SWC15 15" Subwoofer Cabinet
I plan to install either the Reference 15" HO or Titanic MK4 in this, I don't mind enlarging the front battle cutout question is is their enough room to enlarge to fit either driver to make them fit ? rear ok for SPA1000 enlargement cutout ?
These these will both fit in the cabinet with the proper cutout modifications. The maximum woofer depth (from the back of the mounting flange) is 8-1/2" and the maximum amplifier depth is 6-1/4".
Date published: 2014-08-26
Does this work with the Ultimax woofer?
The woofer recess cutout will need to be enlarged about 1/4" in order for the Ultimax woofer to fit properly, but the volume will work well with that woofer.
Date published: 2014-03-10
is there enough room to increase the plate amp cut out(8.5 x 8.5) to accommodate the larger spa500(10 x 10)
Yes there would be enough space for this.
Date published: 2013-12-02
Securing Driver and amp.
Can you use Hurricane hardware here in lieu of wood screws? i think it might be more secure over time...
You can use whichever method of driver mounting you would like. Usually hurricane or T-nuts on an amplifier or lighter woofer is not necessary, wood screws work perfectly fine for most applications.
Date published: 2013-11-05
Any plans to offer an 18" cabinet or kit
I love your cabinets, but I'm looking for something bigger. Do you guys have any plans to offer an 18" cabinet or kit?
PE offers the 245-328 knock down birch cabinet. This cabinet will allow you to fully customize your subwoofer system including your amplifier selection.Use the woofer selection chart or call tech support to aid in woofer selection.Good Luck!
Date published: 2013-01-25
Screws or huricane nuts and hex bolts?
In the product description it states all you need is a few screws. Is that correct, or are there holes for huricane nuts?
This enclosure requires standard wood screws for both the amplifier and the woofer.
Date published: 2012-11-21