300-628_ALT_1.jpg
300-628_ALT_1.jpg
 
300-628_ALT_0
 
300-628_ALT_1
 

Dayton Audio SUB-1000 10" 100 Watt Powered Subwoofer

Brand:| Model: SUB-1000
Overview
Dayton Audio's SUB-1000 active subwoofer speaker system features a powerful 100 watt internal amplifier and heavy duty high-excursion 10" driver. Home theater bass effects were never easier to achieve!
Highlights
  • Downward-firing flared port design for clean, powerful bass
  • Selectable "Auto-on" mode
  • Heavy duty long-throw 10" woofer
  • Perfect for small home theaters or listening rooms
  • Unobtrusive textured black vinyl finish
Part # 
300-628
Weight: 32.9 lbs.  
IN STOCK
List Price$149.99
You Save27%
Shipping Upcharge$9.95
Your Price
$109.00
Part # 300-628
Qty:  EA
Available Payment Methods

Product Details

Dayton Audio SUB-1000 10" 100 Watt Powered Subwoofer

The Dayton Audio SUB-1000 10" powered subwoofer system is the perfect addition to any home theater system. This powered sub features a bottom-firing, flared port, bass reflex design for reduced port noise and increased bass response. It also utilizes a long-throw 10" woofer and up to 100 watts of house-shaking power.

The amplifier features high and low level inputs and high level outputs, a phase switch, independent volume control, an auto on/off switch (activated by an input signal) and a variable 12 dB electronic low pass filter. This compact sub is finished in an unobtrusive black vinyl that will complement any decor.

Specifications: • Power output: 100 watts RMS • Frequency response: 30-140 Hz • Box design: Ported • Inputs: RCA line level & speaker level • Outputs: Speaker level • Crossover frequency control: Continuously variable from 40 Hz to 140 Hz @ 12 dB/octave • Phase switch • Auto on/off • Power requirements: 120 VAC, 60 Hz • Dimensions: 14-3/4" H x 14-3/16" W x 15-3/4" D.

New! Add the 300-580 Dayton Audio Sub-Link XR wireless subwoofer kit to any Dayton Audio powered subwoofer, for limitless placement possibilities and great bass without wires! Click here to go wireless.



Product Specifications
  • Woofer Diameter10"
Dayton Audio SUB-1000 10" 100 Watt Powered Subwoofer
  • BrandDayton Audio
  • ModelSUB-1000
  • Part Number300-628
  • UPC844632094101
  • Product CategoryPowered Subwoofers
  • Unit of MeasureEA
  • Product Rating
    (57 Reviews)
  • Weight32.9 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Dayton Audio SUB-1000 10" 100 Watt Powered Subwoofer
in the Powered Subwoofers product category.

Reviews

Dayton Audio SUB-1000 10" 100 Watt Powered Subwoofer
Dayton Audio SUB-1000 10" 100 Watt Powered Subwoofer is rated 4.5614 out of 5 by 57.
Rated 5 out of 5 by from great buy!I bought this about a month ago to compliment my KT66SE amp and ps 220 8 fullrangers. At little over $100 I figured the price was right. What a surprise! It blends really well in my system and was easy to set up. Adds just the right amount of oomph I was looking for without being boomy. Parts Express is the best!
Date published: 2014-07-05
Rated 5 out of 5 by from Wow what a great sub.This sub really kicks but is tight and accurate. It was easy to hook up and adjust. Highly recommended especially at this price.
Date published: 2014-06-16
Rated 5 out of 5 by from Super SubI purchased this sub to fill in the low end in a 2.1 system with the Dayton BR-1 kit I also purchased from Parts Express. It's doing its job competently; can't complain.
Date published: 2014-06-12
Rated 5 out of 5 by from Best sub for pinballThere has been a lot of promo for people adding Polk PSW-10 subs to their pinball machines. Reading reviews online, the Dayton looked like it was a better sub so I bought both in effort to compare them. After testing both on a few of my games, I prefer the Dayton over the Polk. The Dayton has more punch and is less muddy.
Date published: 2014-05-09
Rated 4 out of 5 by from Great Price!My old Infinity subwoofer started making strange noises and I couldn't get it to stop so I needed a new one but didn't want to spend a lot of money. The Dayton Audio has a great price. It was a little bigger than I expected. I tried leaving it on "auto" instead of "on" but I didn't hear any bass for a while. I had to turn it to "on" to make sure it worked. I turned the gain a little higher than I would have expected to based on the Parts Express video review. Maybe my old sub was too boomy and this one is tighter? I don't know all the audio terms. Anyway, it sounds good. Hopefully it will last a long time.
Date published: 2014-05-02
Rated 5 out of 5 by from Better than Bose originalPurchased on a Thursday, delivered on a Monday. I had a Bose 501 system and the base died I have been looking for a replacement. After talking to the repair section I was told a Dayton Sub 1000 would compliment the Bose Twitters, very happy I called. It not only works great it's better than the original bass that came with the system. The knowledge of the repair guy was excellent and ordering by phone was extremely friendly and easy. Now I finally get to here by Kenwood stereo once again. It is a great replacement sub woofer the sound is tremendous for large or small rooms. Right now if I run my stereo volume above level 4 on the dial I'm rocking the walls.It's been a 6 month search to find a bass replacement, most company's want to sell you a new system, but parts express listen and provide advice and offered alternatives to buying a new system. I'm very, very happy with the Dayton Sub 1000, great buy for the price.
Date published: 2014-05-01

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Dayton Audio SUB-1000 10" 100 Watt Powered Subwoofer

Is this sub really 100 watts continuous power? It seems to hit a brick wall beyond a certain volume which makes me think it's 100 watts peak power not continuous. I would like to upgrade to a more powerful amp. Anyone have any suggestions?

Asked by: BillBill
Yes this subwoofer will produce 100 watts RMS. There is a lot involved in the output you will get from a subwoofer, room placement, receiver output levels etc. If possible, I would recommend trying differnet places in the room, it may be sitting in a null. Unfortunately a larger amp will not be very beneficial since you can only get so much from a 10" subwoofer.
Answered by: MattP
Date published: 2014-06-16

Is there a version of this subwoofer with 1/4" or XLR inputs & outputs?

Asked by: JeremyRyan
Unfortunately no, the only subwoofers we offer with a balanced input will be for pro audio.
Answered by: MattP
Date published: 2014-04-04

Want to add a sub to an occasionally used system.B652 fronts and Minimus 7's rears. The room is roughly 15x15, but an A Frame,ceiling slopes to 20' h front and rear. Carpet floor. Would the 10" be the right size or could I get away with the 8".

Asked by: bgbuffalo1
I would consider that a small to medium sized room, or about average. The 8 will have no problem filling it but it may have trouble if you decide to turn the volume up a bit. The 10 will be able to handle this better, but if you never crank it the 8 should work fine.
Answered by: MattP
Date published: 2014-03-21

I have active monitor speakers M-audio av40. Will it be possible to connect them to this sub? 

Asked by: Koki
The monitors will have to have a subwoofer or line output in order to work with a subwoofer like this.
Answered by: MattP
Date published: 2014-03-15

I have an Onkyo TX-DS787 amp. The instructions indicate the powered subwoofer should be connected to the Pre-Out plug. The is only one, no right and left. Would this unit be usable. The original speaker I am replacing had a LFE IN (Unfiltered) plug.

Asked by: FredGH
You can use the Left line in when connecting to a Mono LFE type of output. The two are summed to mono at the input anyways so it will work out the same
Answered by: Chrisf
Date published: 2014-03-11

Once an input signal has been detected, how long does the amplifier typically remain on?

Asked by: don4264
Generally the amplifier will stay on for 10-15 minutes before it shuts off.
Answered by: MattP
Date published: 2014-02-24

Videos

Customer Projects

Customer projects that include: Dayton Audio SUB-1000 10" 100 Watt Powered Subwoofer

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

Discussions in our TechTalk Forum that include: Dayton Audio SUB-1000 10" 100 Watt Powered Subwoofer

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1