Dayton Audio PMPC-1.0 1.0uF 250V Precision Audio Capacitor

Brand:|Model: PMPC-1.0
These capacitors offer excellent build quality, long-term reliability, and astonishing sonic clarity, all at a 1% tolerance for improved stereo matching between speakers.
In Stock
List Price$2.69
You Save25%
Your Price
Buy 10-99 $1.75
Buy 100-999 $1.52
Buy 1000+$1.22
Part # 027-210
  • Tightest capacitor tolerance available: +/-1%!
  • Specially designed for crossovers and electronics
  • Extra-thick tinned copper leads
  • 250 VDC, high current capacity
  • Dimensions: 10.5 mm x 31 mm

Product Details

Dayton Audio PMPC-1.0 1.0uF 250V Precision Audio Capacitor

Dayton Audio is once again leading the charge at bringing high quality, high value products to the speaker building community. Their new line of 1% tolerance capacitors gives you the ability to construct high-precision crossovers, which can eliminate "stereo wandering" and solidify the imaging and soundstage of your speaker systems. Commercial manufacturers know of this problem and buy thousands of capacitors so they can hand-match them for their products-- now you can effectively do the same, because every capacitor is matched! These capacitors share the same excellent build quality, long-term reliability, and sonic clarity of the standard Dayton Audio metallized polypropylene capacitors. Well-known in the industry as the brand of choice for use in loudspeaker crossovers, they offer the performance of boutique capacitors at a fraction of the price. Let the excellent reputation of Dayton Audio and their Precision Capacitors help you build the best speakers that you possibly can.

Specifications: • Rated: 250 VDC • Tolerance: 1% • Value: 1.0 uF • Dimensions: 10.5 mm Dia. x 31 mm L.

Product Specifications
  • Capacitance1.0 µF
  • Voltage Rating250V
  • Tolerance1%
Dayton Audio PMPC-1.0 1.0uF 250V Precision Audio Capacitor
  • BrandDayton Audio
  • ModelPMPC-1.0
  • Part Number027-210
  • UPC844632055560
  • Product CategoryMetalized Polypropylene Crossover Capacitors
  • Unit of MeasureEA
  • Product Rating
    (4 Reviews)
  • Weight0.02 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Dayton Audio PMPC-1.0 1.0uF 250V Precision Audio Capacitor
in the Metalized Polypropylene Crossover Capacitors product category.


Dayton Audio PMPC-1.0 1.0uF 250V Precision Audio Capacitor
Dayton Audio PMPC-1.0 1.0uF 250V Precision Audio Capacitor is rated 4.75 out of 5 by 4.
Rated 5 out of 5 by from works great on my preampI used these on my preamp and I was happy with the results.
Date published: 2013-10-13
Rated 5 out of 5 by from WHY PAY 10 INPUT COUPLING CAP FOR AMP BUILDERSDayton is one of the most respected in the industry and this cap is no exception. I just finished my amp using 4 Paralleled lm675s Circuit per channel I purchased at a steel. But the components that were used and recomended by NSC recomended 1% and .1 % tolerenced components. I needed a coupling cap for the inputs and to my surprise DAYTON just happened to have such a thing. But something was wrong. it cost 10x less than others. MMM! Sould I? Why not? I am glad I did! They sound fantastic! Open airy, warm mids, highs that send chills down your spine and oh yes, tight deep bass! Thanks PE for stocking these beauties!!
Date published: 2010-09-17
Rated 4 out of 5 by from Well worth tryingI use these in my Klipsch Forte speakers on the tweeters. Very clean and musical without adding the hyper-detail of some high-end caps. Once you hit the polypropylene level, sonic differences between brands are subtle at best anyway. Caps should sound neutral..why obsess over using them as expensive tone controls?
Date published: 2008-04-10
Rated 5 out of 5 by from Very High Quality CapacitorThe build quality of these Dayton 1% caps is great and in one area better than any other capacitors I have seen. The leads are very thick, on a 1uf cap they must be about 16 gauge. I've seen so many large value film caps of large physical size with thin leads of less than 18 gauge, ridiculous. The caps body is very uniform and well constructed, unlike others I have seen at many times the price. They sound great to me, excellent job PE.
Date published: 2007-07-30
  • 2015-08-04T07:11CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_027-210, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Dayton Audio PMPC-1.0 1.0uF 250V Precision Audio Capacitor
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1986-2015 Parts Express, All Rights Reserved

Live Chat Software