Manuals & Resources

Dayton Audio ME625W 6-1/2" Micro-Edge 2-Way In-Wall Speaker Pair

Brand:|Model: ME625W
The Micro-Edge™ series in-wall and in-ceiling speakers from Dayton Audio combine sophisticated, minimalist styling with robust acoustical engineering and design features, for outstanding home theater and musical performance. The compact ME625W in-wall model installs virtually anywhere, and rewards with rich, detailed sound.
In Stock
List Price$138.99
Regular Price$99.80
You Save21%
Sale Price
Part # 300-437
  • Versatile multi-purpose L/R/surround speaker for home theater or music
  • Contemporary Micro-Edge™ grills with magnetic grill retention
  • 6-1/2" woven Kevlar cone woofer and 1" pivoting silk dome tweeter
  • Mounts vertically or horizontally
  • Room integration switch with selectable 0/-3/-6 dB treble adjustment
  • Optimized 12 dB/octave crossover with exclusive tuning by Dayton Audio

Product Details

Dayton Audio ME625W 6-1/2" Micro-Edge 2-Way In-Wall Speaker Pair

Dayton Audio’s Micro-Edge™ speakers were created to combine the high-quality sonic performance of a premium free-standing speaker with sleek, contemporary in-wall styling, for a thoroughly modern take on the in-wall speaker. The ME625W model features a compact design that’s easy to install virtually anywhere, even where space is limited, and is perfectly suited for use as left, right, or surround channels in a home theater application. The low-profile perforated grill with ultra-slim Micro-Edge™ frame almost disappears into the wall entirely, and is easily paintable to match its surroundings.

The robust 6-1/2" woofer features a rubber surround and a woven black Kevlar cone that provides excellent transient ‘snap’ and crisp vocal clarity along with impactful bass, and the 1" silk-dome tweeter delivers rich detail that never becomes harsh, even at high volumes. The pivoting tweeter mount lets you target the best treble performance directly at the listening position, and the three-position room integration switch lets you decrease treble output if desired, for the best balance with your room's natural acoustics.

All Dayton Audio Micro-Edge™ (ME-series) speakers are timbre-matched for a seamless and consistent home theater experience when used together. For horizontal installation (e.g. center channel), model ME525MTM is recommended.

Specifications: • Power handling: 50 watts RMS/100 watts max • Impedance: 8 ohms • Frequency response: 61-20,000 Hz • Sensitivity: 87 dB 1W/1m (±3 dB) • Dimensions: 12-1/8" H x 8-1/4" W x 3-3/8" D • Cutout size: 10-5/8” H x 6-3/4” W • Sold in pairs.

Dayton Audio ME625W 6-1/2" Micro-Edge 2-Way In-Wall Speaker Pair
  • BrandDayton Audio
  • ModelME625W
  • Part Number300-437
  • UPC848791001277
  • Product CategoryIn-Wall Speakers
  • Unit of MeasurePR
  • Product Rating
    (3 Reviews)
  • Weight9.4000 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Dayton Audio ME625W 6-1/2" Micro-Edge 2-Way In-Wall Speaker Pair
in the In-Wall Speakers product category.


Dayton Audio ME625W 6-1/2" Micro-Edge 2-Way In-Wall Speaker Pair
Dayton Audio ME625W 6-1/2" Micro-Edge 2-Way In-Wall Speaker Pair is rated 4.3333 out of 5 by 3.
Rated 5 out of 5 by from Kitchen remodelJust finished installing my ME625W speakers above two kitchen entry doors. Sprayed the grills wall color with thinned down latex wall paint so as not to close up any micro-holes. They turned out beautiful! The sound is fantastic and they really look great. The grills are only 4 mm thick and blend in nice for a stealth look. Truly well made and really do sound great. Just don't be ham-fisted when you tighten the screws down, just bring them down snug and stop, they'll be just right. Very happy with them, easy to install and the template based cutout fit perfect. I suggest using a small level on the template to make sure your hole is cut level.
Date published: 2015-09-24
Rated 4 out of 5 by from About As Easy As It GetsJust finished install yesterday(12/4/14). After setting everything up I have to say that the sound quality is above what I was expecting. I'm changing from a 2.1(boxed) to an in-wall 5.1 using all Dayton Micro-Edge speakers & an old M&K MX80 sub. In my medium sized room(about 13'x23'x) these were able to fill the room with plenty of sound at an effortless pace. I have my high pass/low pass xover set to 80hz @ 12 & 24db/octave respectively. Everything is powered by a B&K AVR507(150Wx7). The additional headroom from the 507 I feel adds to the punch that is in place from these speakers.If I had to upgrade this unit in any way there would be two small modifications. First, the mounting hardware should be a bit more sturdy. I didn't have an issue but know others have. Second would be a new pivot for the tweeter. While they are adjustable, they are not very smooth & some were downright difficult. Will have to wait and see about long term performance & reliability but initial impressions were very good. My old monitors(about $3k/pr) are now in a dedicated 2ch room. I was surprised at just how close these Dayton's performed above 80Hz in comparison. They aren't on the same level of course but the performance overall was very surprising considering the cost difference.
Date published: 2014-12-05
Rated 4 out of 5 by from Really impressed with this speaker.I bought these a few weeks ago, and my initial impression of them was that they were a bit bland -- but thought I should expect that from an in-wall. So before I came here to review them, I wanted to let them break in, and listen to a range of audio before I gave a full review.Overall, I don't think I could be much happier with these speakers (Unless if I waited until now to get them on Sale! This price is *WOW* for these speakers)Seriously, once these speakers got some watt hours on them, and I got the levels sorted out in my room, I'm blown away that a in-wall speaker can sound like these guys do. These are actually my primary speakers, and have 4 set up in a LRC configuration. Having 2 speakers being used for a center the highs were a tad sharp (Referee whistles sounded like they were slicing thru your soul), but once I dropped the co to -6db and adjusted the tweeter direction they really mellowed perfectly.Note: I have my center pair at -6db, Left and right are 0db.The mids are also surprisingly punchy. I can run these without a sub for daily TV, and they don't disappoint, but for any music volume above conversation level they can get a lil muddy if you try to force a bit too much low thru them. If you have the mounting room, I think the 8" version will help if you plan on going sans sub sometimes.So, why minus 1 star? The mounting posts and feet are plastic, and a bit fragile. Just need to be careful you don't over tighten when you mount them (Hand tight is tight enough) as you can strip the threads on the grab feet if you over tighten them. If you ever need to un mount the speakers do so slowly as you can stress the posts if you unscrew too far. Really, a minor issue -- just would of liked if they were metal.Compared to some name brand speakers at 2-3x's the price I listened to before purchasing these they easily meet or exceed all of them. Unless your budget is over $200 per speaker, I don't think you'll be able to beat these.Thanks Dayton! Keep up the good work!
Date published: 2014-02-13
  • 2015-10-08T06:51CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_300-437, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Dayton Audio ME625W 6-1/2" Micro-Edge 2-Way In-Wall Speaker Pair

Ok so I have to know if I have a certain color in my home theatre like its called high speed steel .Its a dark grey with blue undertones ..HOW THE HECK WOULD I MATCH THAT COLOR TO THE GRILL? Get a air brush and use the color in it?

Asked by: PITBULL
Yes we recommend spraying these in order to not plug the holes in the grill.
Answered by: MattP
Date published: 2015-06-30

I'm planning to use a pair of these as surround speakers. One will be mounted in a wall as intended, but the other needs to be enclosed to sit on a shelf. Anyone know what volume enclosure would be optimum? No, it can't be as large as the wall cavity. :-)

Asked by: tomb
With a speaker like this, the larger the enclosure the better. If you can manage it, I wouldn't go any smaller than about 0.75 cubic feet. You would get best results using an aperiodic type vent in the enclosure so it would act more like an infinite baffle design.
Answered by: MattP
Date published: 2014-07-28

I have a strange soffett where I intend to mount these, am curious if the grab feet can grab along the short side(top/bottom), or if they only grab along the sides of the speaker.  The sides in this case are the longer side in my question.

Asked by: MesMan
The dog ears on this speaker only grab along the sides, not top and bottom.
Answered by: MattP
Date published: 2014-02-21
  • 2015-10-08T07:49CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_300-437, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational


Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Get Sales Flyer
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1986-2015 Parts Express, All Rights Reserved

Live Chat Software