300-435_ALT_3.jpg
300-435_ALT_3.jpg
 
300-435_ALT_0
 
300-435_ALT_1
 
300-435_ALT_2
 
300-435_ALT_3
 

Manuals & Resources

Dayton Audio ME525MTM 5-1/4" Micro-Edge MTM LCRS In-Wall Speaker Each

Brand:|Model: ME525MTM
The Micro-Edge series in-wall and in-ceiling speakers from Dayton Audio combine sophisticated, minimalist styling with robust acoustical engineering and design features, for outstanding home theater and musical performance. The dual-woofer ME525MTM is designed to be used as a front, center, or surround channel speaker.
In Stock
List Price$89.99
You Save28%
Your Price
$64.80
Buy 4-11 $61.50
Buy 12+$57.80
Part # 300-435
Share:
Highlights
  • Versatile all-purpose L/C/R/S speaker for home theater or music
  • Contemporary Micro-Edge™ grills with magnetic grill retention
  • Dual 5-1/4" woven Kevlar cone woofers and 1" pivoting silk dome tweeter
  • Mounts vertically or horizontally
  • Room integration switch with selectable 0/-3/-6 dB treble adjustment
  • Optimized 12 dB/octave crossover with exclusive tuning by Dayton Audio

Product Details

Dayton Audio ME525MTM 5-1/4" Micro-Edge MTM LCRS In-Wall Speaker Each

Dayton Audio’s Micro-Edge™ speakers were created to combine the high-quality sonic performance of a premium free-standing speaker with sleek, contemporary in-wall styling, for a thoroughly modern take on the in-wall speaker. The ME525MTM model uses dual woofers and a centrally-mounted pivoting silk-dome tweeter, for a speaker with symmetrical dispersion that can be mounted vertically as left/right/surround channel speakers, or horizontally under a display or projection screen as a center-channel speaker. The low-profile perforated grill with ultra-slim Micro-Edge™ frame almost disappears into the wall entirely, and is easily paintable to match its surroundings.

The dual 5-1/4" woofers feature woven black Kevlar cones that provide excellent transient 'snap' and crisp vocal clarity along with impactful bass, and the 1" silk-dome tweeter delivers rich detail that never becomes harsh, even at high volumes. The pivoting tweeter mount lets you target the best treble performance directly at the listening position, and the three-position room integration switch lets you decrease treble output if desired, for the best balance with your room’s natural acoustics.

All Dayton Audio Micro-Edge™ (ME-series) speakers are timbre-matched for a seamless and consistent home theater experience when used together. The ME525MTM is perfectly sized to fit between studs in standard 16-inch stud spacing when mounted horizontally as a center channel speaker. No additional adjustment is required for horizontal mounting.

Specifications: • Power Handling: 50 watts RMS/100 watts max • Impedance: 8 ohms • Frequency Response: 60-20,000 Hz • Sensitivity: 86 dB 1W/1m (±3 dB) • Dimensions: 7-1/2" H x 14-3/4" W x 2-7/8" D • Cutout size: 6-1/8" H x 13-3/8" W (horizontal mounting) • Sold individually.



Product Specifications
  • Special FeaturesMicro Edge Low Profile
  • ConfigurationMTMLCR
  • Woofer Diameter5-1/4"
Dayton Audio ME525MTM 5-1/4" Micro-Edge MTM LCRS In-Wall Speaker Each
  • BrandDayton Audio
  • ModelME525MTM
  • Part Number300-435
  • UPC848791001260
  • Product CategoryIn-Wall Speakers
  • Unit of MeasureEA
  • Product Rating
    (6 Reviews)
  • Weight6.3000 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Dayton Audio ME525MTM 5-1/4" Micro-Edge MTM LCRS In-Wall Speaker Each
in the In-Wall Speakers product category.

Reviews

Dayton Audio ME525MTM 5-1/4" Micro-Edge MTM LCRS In-Wall Speaker Each
Dayton Audio ME525MTM 5-1/4" Micro-Edge MTM LCRS In-Wall Speaker Each is rated 4.8333 out of 5 by 6.
Rated 5 out of 5 by from My customer loved it!!Very easy installation and very clean! Customer was very happy and loved the sound.Would recommend it to all my customers. Thank you.
Date published: 2015-05-24
Rated 5 out of 5 by from Excellent Product!I bought this center channel to finish my home theater system in my living room. This speaker is installed in conjunction with two Dayton Audio in wall speakers and two Dayton Audio in ceiling speakers to complete a 5.1 system. The template that came with the speaker made it simple to install. Build and sound quality is excellent. I definitely recommend this speaker.
Date published: 2015-03-29
Rated 4 out of 5 by from About As Easy As It GetsJust finished install yesterday(12/4/14). After setting everything up I have to say that the sound quality is above what I was expecting. I'm changing from a 2.1(boxed) to an in-wall 5.1 using all Dayton Micro-Edge speakers & an old M&K MX80 sub. In my medium sized room(about 13'x23'x) these were able to fill the room with plenty of sound at an effortless pace. I have my high pass/low pass xover set to 80hz @ 12 & 24db/octave respectively. Everything is powered by a B&K AVR507(150Wx7). The additional headroom from the 507 I feel adds to the punch that is in place from these speakers.For the center channel, I ended up having to fabricate a mantel above my fireplace as the support structure behind the drywall did not leave enough depth(in the center of the fireplace at least) to mount this unit. The mantel is approx. 2.1cu' and sealed from the listening area. There is also a vent into the wall that is approx. 3"x4" in size to help the speaker "breath".If I had to upgrade this unit in any way there would be two small modifications. First, the mounting hardware should be a bit more sturdy. I didn't have an issue but know others have. Second would be a new pivot for the tweeter. While they are adjustable, they are not very smooth & some were downright difficult.Will have to wait and see about long term performance & reliability but initial impressions were very good. My old monitors(about $3k/pr) are now in a dedicated 2ch room. I was surprised at just how close these Dayton's performed above 80Hz in comparison. They aren't on the same level of course but the performance overall was very surprising considering the cost difference.
Date published: 2014-12-05
Rated 5 out of 5 by from Sounds Great!I built a mantel with space for a center channel speaker inside. The cavity is approximately 2 sf3 but not well sealed so the in-wall speaker was an affordable choice. It sounds great!
Date published: 2014-11-12
Rated 5 out of 5 by from Excellent SpeakerBought this for a five speaker surround. Sounds excellent. I cannot speak highly enough about Dayton audio.
Date published: 2014-10-20
Rated 5 out of 5 by from Great sounding speakers!I used these in my Den for Rear surround and am very happy with them! I love the fact that the 1" tweeter in these is "aimable". I aimed them both at my recliner and when I listen to music,its like wearing headphones that you can't feel on your head! Great sounding High's and Mid. The Bass isn't bad either. Combined with my other speakers, my little Den sounds great! Great for surround. I would even use them for Center and Mains! (with a good Sub of course).
Date published: 2014-05-21
  • 2015-08-03T06:58CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_300-435, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Dayton Audio ME525MTM 5-1/4" Micro-Edge MTM LCRS In-Wall Speaker Each

Do you sell replacement grills yet?

Asked by: RicRuff
We do not have replacement grills available for these speakers.
Answered by: MattP
Date published: 2015-06-30

I tried painting the grill with wall paint and they look bad.  Is it possible to get a new grill?

Asked by: willmop
Unfortunately we do not have replacement grills available for these, you may have to strip the old paint off and start from the bare metal. We do recommend spraying them for the best coverage.
Answered by: MattP
Date published: 2015-03-18

How well do these speakers work if the wall is filled with insulation instead of an open void? Which would be the preferred installation?

Asked by: SteveW2
These will work equally well for either application. As an infinite baffle install the insulation will do very little in terms of changing the Q of the chamber they are mounted it. having insulation will not negatively effect performance.
Answered by: MattP
Date published: 2015-02-27

My TV is mounted on a hollow but enclosed wall underneath the stairs.  Would mounting all three speakers (Left, Center and Right) on this wall alongside the TV cause adversely impact sound quality, as there is no isolation on the rear between the speakers

Asked by: HarryS
No this will not negatively effect the sound you will get from the speakers.
Answered by: MattP
Date published: 2015-02-19

Looking for the felt that's inside speakers we purchased through you on or about 6/7/14.  We misplaced them when we painted the speakers to match the wall.  

Asked by: Cawelch10
This is not something we sell separately. You should be able to get a thin similar material from a local fabric store that will work in a similar fashion.
Answered by: MattP
Date published: 2015-04-22

What type of connectors do these have and how do the speaker wires connect to them?

Asked by: NDB1
These use spring loaded speaker terminals that will accept bare speaker wire.
Answered by: MattP
Date published: 2015-01-09
  • 2015-08-03T08:47CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_300-435, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Videos

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1986-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software