Dayton Audio H07E 6" x 6" Elliptical Waveguide 1" Threaded

Dayton Audio H07E 6" x 6" Elliptical Waveguide 1" Threaded

Brand:| Model: H07E
Overview
The Dayton Audio H07E high frequency waveguide is precision molded from high-performance plastic, and has an industry-standard 1-3/8" x 18 TPI throat for mounting screw-on style drivers.
Highlights
  • Uncolored, natural sound
  • Precision molded from high-performance plastic
  • Standard 1-3/8" x 18 TPI mounting for screw-on drivers
  • Nominal dispersion pattern: 80° H x 50° V
  • Recommended minimum crossover frequency of 2,200 Hz
Part # 
270-316
Weight: 0.6801 lbs.  
IN STOCK
List Price$10.99
You Save27%
Your Price
$7.99
Buy 4-up$7.27
Part # 270-316
Qty:  EA
Available Payment Methods

Product Details

Dayton Audio H07E 6" x 6" Elliptical Waveguide 1" Threaded

A waveguide couples the high frequency driver to the listening space without the harmful distortion artifacts of marginally designed and implemented horn loading. It achieves this through the use of non-traditional geometries and lower expansion rates. The resultant sound has less distortion, with an "open" characteristic not often associated with typical "pinched" or "honky" compression driver/horn combinations. Dayton Audio waveguides reveal all of the articulate, accurate sound reproduction that your HF drivers are capable of delivering, whether the application is live sound, critical studio monitoring, or demanding home audio playback. The Dayton Audio H07E high frequency waveguide is precision molded from high-performance plastic, and has an industry-standard 1-3/8" x 18 TPI throat for mounting screw-on style drivers. Its unique elliptical flare exhibits a nominal 80° horizontal x 50° vertical coverage pattern, and will provide useful acoustical loading down to 2,200 Hz. Dimensions: 5-7/8" H x 5-7/8" W x 3-3/4" D.



Product Specifications
  • Mounting Type1-3/8"-18 TPI
  • Entry / Throat Diameter1"
  • ConstructionABS
Dayton Audio H07E 6" x 6" Elliptical Waveguide 1" Threaded
  • BrandDayton Audio
  • ModelH07E
  • Part Number270-316
  • UPC844632009259
  • Product CategoryHorns & Waveguides
  • Unit of MeasureEA
  • Product Rating
    (7 Reviews)
  • Weight0.6801 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Dayton Audio H07E 6" x 6" Elliptical Waveguide 1" Threaded
in the Horns & Waveguides product category.

Reviews

Dayton Audio H07E 6" x 6" Elliptical Waveguide 1" Threaded
Dayton Audio H07E 6" x 6" Elliptical Waveguide 1" Threaded is rated 4.7143 out of 5 by 7.
Rated 5 out of 5 by from SUPERPrototyping this Elliptical Waveguide for an ultra compactarray-able speaker system as an addition to my speaker line proved the one to use.Has Smooth horizontal and vertical coupling to one other and good evenness.I modified horn to in-lay closer with 6" woofers.see images: model # 2611 "Mighty Mouse"Great Pick PE, Thank You
Date published: 2013-01-05
Rated 5 out of 5 by from FantasticThis Waveguide is wonderful when mated with a Pyle PDS382 1" Compression Driver. Exceptionally smooth from 3K to 10K with minimal roll-off. Horizontal dispersion within +/- 30 degrees window is good, no sharp nulls or peaks.I have it in a 2-way with a Dayton RS-180s, crossing actively at 2,250Hz. More information can be found at: http://ampslab.com/nightingale_ii.htm
Date published: 2012-12-22
Rated 4 out of 5 by from smaller, but still killerThese used to be 7x7". I don't know why, but they are proportionately smaller now. They sound roughly the same, with the exception of a higher Fo. They are only usable above approximately 2200 Hz. They still sound great though. Still worth the money, no doubt.
Date published: 2009-11-04
Rated 5 out of 5 by from Incredible!!!I purchased a pair of these to mate with 12's for a small venue system for my live audio production company. Selenium D210Ti drivers, 3.8Khz, 6db x-over, L-pad 7db for roughly 97db 1w/1m. They sound wonderful. My DBX 2231 eq is completely flat from 4k up. This waveguide is worth every penny. And with the sale price of $6, you CAN'T beat it. Drawbacks. Slightly resonant. I filled in the 1/2 inch voids on the back with fiberglass resin, and PRESTO! resonances gone. Also, not a very high gain product. It IS a waveguide though, so I wasn't expecting much anyway. Buy it. Don't hesitate. You won't regret it.
Date published: 2009-07-08
Rated 4 out of 5 by from It's a 6 by 6!!!Great waveguide, but why is the packaging and description off BY MORE THAN ONE INCH? This thing is about 5.875" x 5.875" - so don't plan your baffle around something that fills more.
Date published: 2009-06-18
Rated 5 out of 5 by from Change from Titanium dome to horn tweeterI changed out a blown JBL 1" titanium tweeter toa horn tweeter ( an Eminince super tweeter witha threaded adapter nipple ). The results are fabulous. The JBL was reated at 35 watts(2.5 KHZ), while the new is rated at 45 watts @2.5KHZ//85 watts@3.5KHZ). My Yamaha Pre-ampallows me to set the crossover. While my CrestAudio power amp blows these speaker hard ( JBLL-100 ) Thank You. PS-order the large productbook
Date published: 2009-03-25

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Dayton Audio H07E 6" x 6" Elliptical Waveguide 1" Threaded

What size cutout?

Any idea what the cutout is for this item?
Asked by: joshag
The cutout for this waveguide should be 3-1/2" in diameter.
Answered by: RussR
Date published: 2013-09-04

Customer Projects

Customer projects that include: Dayton Audio H07E 6" x 6" Elliptical Waveguide 1" Threaded

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1