Dayton Audio DNR-2.0 2 Ohm 10W Precision Audio Grade Resisto

Dayton Audio DNR-2.0 2 Ohm 10W Precision Audio Grade Resistor

Brand:| Model: DNR-2.0
Overview
Dayton Audio DNR Series "Audio Grade" resistors are used in Zobel networks and fixed L-Pad attenuator circuits for tweeters. Nickel-chromium elements, a high thermal conductivity ceramic core, and welded construction all contribute to their low-noise performance.
Part # 
004-2
Weight: 0.01 lbs.  
IN STOCK
List Price$1.99
You Save30%
Your Price
$1.38
Buy 4-up$1.09
Part # 004-2
Qty:  EA
Available Payment Methods

Product Details

Dayton Audio DNR-2.0 2 Ohm 10W Precision Audio Grade Resistor
Dayton Audio DNR Series "Audio Grade" resistors are primarily used in Zobel networks and fixed L-Pad attenuator circuits. Nickel-chromium elements, a high thermal conductivity ceramic core, and welded construction all contribute to their low-noise performance. With a precision 2% tolerance, gold-plated oxygen free copper leads, and low-inductive wire wound construction, this resistor is a must for your next speaker crossover project! Dimensions: 48 mm L x 10 mm W x 10 mm H. Sold individually.


Product Specifications
  • Resistance2 ohms
  • CompositionLow-Inductive Wirewound
  • Power Rating10 Watt
  • Tolerance2%
Dayton Audio DNR-2.0 2 Ohm 10W Precision Audio Grade Resistor
  • BrandDayton Audio
  • ModelDNR-2.0
  • Part Number004-2
  • UPC844632025754
  • Product CategoryAudio Grade / Non-inductive Resistors
  • Unit of MeasureEA
  • Product Rating
    (4 Reviews)
  • Weight0.01 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Dayton Audio DNR-2.0 2 Ohm 10W Precision Audio Grade Resistor
in the Audio Grade / Non-inductive Resistors product category.

Reviews

Dayton Audio DNR-2.0 2 Ohm 10W Precision Audio Grade Resistor
Dayton Audio DNR-2.0 2 Ohm 10W Precision Audio Grade Resistor is rated 3.5 out of 5 by 4.
Rated 5 out of 5 by from don't believe everything you readthese are quality resistors and I have yet to have a problem with one, have used plenty of different values.In response to the guy whining about inductance: simply get several of these and bundle them in parallel. I used bundles of 4 of these to make 1/2 ohm, 40W resistors. DON'T FORGET inductance reduces in parallel, E.g. whatever tiny bit of inductance these may have is divided by 4 in my described configuration. If you're worried about inductance in these just bundle a few of a higher value. You'll have less inductance and greater power handling... Seriously, at $1/ea it's easy and cheap.
Date published: 2010-11-21
Rated 2 out of 5 by from Good-Bye 20KHz20 000khz is gone! "Precisley" moddifiwant you dont moddified.only good for testing your pad level, then you should replace them with quality Mills/others with 0/Zero frequencey shifting.
Date published: 2010-10-26
Rated 2 out of 5 by from Another great sound muddierEquivalent to whatever stock junk is in modern cheap speakers. A good way to dirty things up.
Date published: 2010-10-25
Rated 5 out of 5 by from Does what it says on the box...Works well, very close tolerances - mine measured within 1% of each other. Going to assume the rest of the range is just as good and order some more.
Date published: 2008-10-14

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Dayton Audio DNR-2.0 2 Ohm 10W Precision Audio Grade Resistor

Is this particular resistor (10W2RJ) the same as this Dayton Audio DNR-2.0 2 Ohm 10W Precision Grade Resistor?

Asked by: mstephen
Yes this Dayton will work fine as a replacement for that value.
Answered by: MattP
Date published: 2014-06-30

Customer Projects

Customer projects that include: Dayton Audio DNR-2.0 2 Ohm 10W Precision Audio Grade Resistor

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE2