Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email firstname.lastname@example.org
for a prompt reply.
Dayton Audio BR-1CAB BR-1 6-1/2" 2-Way Speaker Cabinet Pair
I'd like to use these as my computer speakers. What would be a good amp for this purpose? I don't need complicated equalizer controls, just volume and perhaps bass and treble.
These are empty enclosures and require speakers for them to work. They are cabinets made for our BR-1 kit which you can see below.http://www.parts-express.com/dayton-audio-br-1-6-1-2-2-way-bookshelf-monitor-speaker-kit-pair--300-640
Date published: 2015-03-13
Is there a replacement baffle? Thanks
Unfortunately the baffles on these are not replaceable.
Date published: 2015-01-13
Do you, can you put together a kit as recommended for this enclosure including 2 way crossover design? I think this is what I'm looking for, small punchy hi fi sound.
We have a kit that uses these cabinets called the BR-1 which you can see below.http://www.parts-express.com/dayton-audio-br-1-6-1-2-2-way-bookshelf-monitor-speaker-kit-pair--300-640You can also purchase the components only.http://www.parts-express.com/br-1-kit-components--300-641
Date published: 2014-09-04
I would like to use full range speakers instead of messing with crossovers what would be your suggestions for full range driver choices for these cabinets?
This requires a bit more information in order to proceed. Please contact our tech support for more help with this question, email@example.com or 800-338-0531 x1.
Date published: 2014-08-21
What is the volume of these cabinets and what frequency are they tuned to?
Volume of these cabinets is roughly 0.52 cubic feet and they are tuned to ~38 Hz with a 1-1/2" diameter, 6" long port.
Date published: 2014-08-11
Will the Dayton RS28F-4 tweeter fit the cutouts?
The tweeter will likely fit with slight modifications. The recess in the cabinet will be larger than the RS28 flange and the notches for the terminals are in the wrong place.
Date published: 2014-06-24