Crimp Die For Insulated Terminals

Crimp Die For Insulated Terminals

Overview
High carbon steel die for our crimp tool number 360-680. Mounting screws included with handle. Crimps 18-24 AWG, 14-16 AWG, 10-12 AWG insulated terminals Net weight: 1/2 lbs.
Part # 
360-684
Weight: 0.1 lbs.  
IN STOCK
Your Price
$8.95
Buy 6-up$7.80
Part # 360-684
Qty:  EA
Available Payment Methods

Product Details

Crimp Die For Insulated Terminals
High carbon steel die for our crimp tool number 360-680. Mounting screws included with handle. Crimps 18-24 AWG, 14-16 AWG, 10-12 AWG insulated terminals Net weight: 1/2 lbs.


Crimp Die For Insulated Terminals
  • BrandParts Express
  • Part Number360-684
  • UPC844632014253
  • Product CategoryCrimp Frames & Dies
  • Unit of MeasureEA
  • Product Rating
    (8 Reviews)
  • Weight0.1 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Crimp Die For Insulated Terminals
in the Crimp Frames & Dies product category.

Reviews

Crimp Die For Insulated Terminals
Crimp Die For Insulated Terminals is rated 3.75 out of 5 by 8.
Rated 4 out of 5 by from Fits ratcheting Harbor Freight ratcheting crimperI bought an inexpensive crimper from HF, but the jaws were asymmetric and did not crimp insulated connectors tightly. The Parts Express jaws fit perfectly and do a better job, though still not tight enough with #18 wire. Fixed by filing the points a bit. Recommend if using wire diameters #16+
Date published: 2012-10-31
Rated 2 out of 5 by from Just buy the non-insulated jaws...These made some exceptionally weak crimps when using 12 awg 1/4 female quick connects (also bought from PE) with 12 awg wire. I experimented with about 8 connectors before giving up on these and putting the non-insulated jaws in. The non-insulated jaws did a WAY better job of crimping INSULATED connectors. Then I did what I almost always do and took the insulation off and put heat shrink on them instead. So...I gave these 2 stars because they might work better for the other 2 wire gauges that I haven't tried. Otherwise these would have gotten a solid 1 star. The crimps were unacceptable. I'm sure PE would take them back, but it's just not worth the hassle over $10. This is the first thing I've bought from PE that I wasn't happy with (after over $3k of purchases in the past few years).On the plus side, these are a direct fit for my Ideal Crimpmaster crimpers as are the non-insulated version (which I *DO* recommend).
Date published: 2012-07-14
Rated 5 out of 5 by from Crimper that really worksShould have bought one of these a long time ago. Crimps the connectors completely and in 2 places.
Date published: 2009-10-23
Rated 4 out of 5 by from Time and wrist saver. Good value too. Well madeIf you are going to do a lot of insulated terminals, this is the die set to have. Crimps not only the wire but the plastic behind the wire crimp for a strain relief. Fits the Ideal set of crimper handles too.
Date published: 2009-04-09
Rated 1 out of 5 by from These dies didn't fit my ratchet handleThe ad for this product suggested it would fit other manufacturer's handles. When I got them I tried to get them into my tyco handles and they just wouldn't fit. I even tried to adjust the holes to make them fit, but I couldn't make them work. For me, this was a waste of money.
Date published: 2009-02-18
Rated 5 out of 5 by from fits other crimp toolsI bought this product on spec that it would fit other crimp tools and it does. Kinda cool
Date published: 2008-08-08

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Crimp Die For Insulated Terminals

Customer Projects

Customer projects that include: Crimp Die For Insulated Terminals

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1