Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email firstname.lastname@example.org
for a prompt reply.
Clark Synthesis TST429 Platinum Tactile Transducer Bass Shaker
Can I use Buttkicker BKA 1000-N amplifier to power 2 Clark Synthesis Platinum Tactile Transducers? If yes, how do I wire them? Is there a wiring diagram?
Yes you can use that amp for a pair of these. I would recommend simply wiring them in parallel, red to red, black to black.
Date published: 2015-05-20
Which class D plate amp would be ideal to power 2 of these Clark platinums? What would be the proper way to wire them, series or parallel? What ohm and RMS wattage would the proper wiring result in? Thanks!
I would recommend any of the 500 watt plate amp models we offer, from Dayton, Yung or Bash. I would not recommend anything with a bass boost however. The transducers would have to be wired in series which will provide about 125-150 watts of power to each transducer.
Date published: 2014-03-27
If I order the TST 429 Platinum Tactile Transducer through Parts Express, will I be provided with all the different mounting parts?
The supplied parts and hardware with this transducer are below. These can also be viewed in the manual which is available on the product page.A. (1) TST209 TransducerB. (1) Unimount BracketC. (1) 3/8”-16 x 3” Hanger BoltD. (1) 3/8”-16 x 3” Threaded StudE. (1) 3/8”-16 x 1.5” Threaded StudF. (1) 3/8”-16 x 1” Hex BoltG. (4) #12 x 1” ScrewH. (2) 3/8” Jam NutI. (4) #12 WasherJ. (4) #12 Lock WasherK. (1) 3/8” WasherL. (1) 3/8” Lock WasherM. (1) T-Nut• Installation Guide
Date published: 2014-03-06