Clark Synthesis TI-100 Round Natural Rubber Foot

Clark Synthesis TI-100 Round Natural Rubber Foot

Brand:| Model: TI-100
Overview
The Tactile Sound rubber isolation feet are designed to substantially improve the performance of the home theater transducers. When attached under the legs of sofas and chairs, the furniture is decoupled from the floor, which concentrates the vibrational forces into the seats.
Highlights
  • Low-profile rubber foot
  • Works with furniture that needs minimal extra clearance for transducer mounting
  • Dimensions: 2-1/2" dia. x 1" H
  • Includes washer and 1-1/2" wood screw
Part # 
300-876
Weight: 0.222 lbs.  
IN STOCK
Your Price
$6.95
Part # 300-876
Qty:  EA
Available Payment Methods

Product Details

Clark Synthesis TI-100 Round Natural Rubber Foot

The Tactile Sound rubber isolation feet are designed to substantially improve the performance of the home theater transducers. When attached under the legs of sofas and chairs, the furniture is decoupled from the floor, which concentrates the vibrational forces into the seats. At the same time, extraneous sound transmission into neighboring rooms or apartments is drastically reduced.

Note: Sales of this product are restricted to North America. Customers outside of North America that purchase this product receive no support or warranty from Clark Synthesis.

Sold individually. Includes washer and 1-1/2" long wood screw. Dimensions: 2-1/2" dia. x 1" H.



Product Specifications
  • Construction MaterialRubber
  • Color / FinishBlack
Clark Synthesis TI-100 Round Natural Rubber Foot
  • BrandClark Synthesis
  • ModelTI-100
  • Part Number300-876
  • UPC645509403015
  • Product CategoryCase & Cabinet Feet
  • Unit of MeasureEA
  • Product Rating
    (4 Reviews)
  • Weight0.222 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Clark Synthesis TI-100 Round Natural Rubber Foot
in the Case & Cabinet Feet product category.

Reviews

Clark Synthesis TI-100 Round Natural Rubber Foot
Clark Synthesis TI-100 Round Natural Rubber Foot is rated 4.0 out of 5 by 4.
Rated 4 out of 5 by from Used as speaker enclosure feet.I bought these to use on my Radio Shack Mach Two 15" speaker enclosures. My enclosures sit on a bare concrete floor and I was concerned about moisture damaging the cabinets. Putting these on the bottom of the enclosures not only stopped dampness from penetrating the wood but also stopped any annoying vibrations on lower bass frequencies. Great natural rubber product.
Date published: 2012-01-17
Rated 5 out of 5 by from Aids in full HT experienceIf you have the Clark Synthesis or Aura Bass Shaker transducers, these feet do a good job in isolating the furnature that the transducers are attached to from the floor. Putting these on my sofa seemed to almost double the effect. I recommend these for anyone using the transducers mounted on furniture.
Date published: 2009-10-08
Rated 3 out of 5 by from There rubber feet!Not much to review here but Clark does recommend them for maximum tactile sound and they do bring whatever you put them on up a whole inch. They are not much more to add a set to your order so I say try em out!
Date published: 2009-08-25
Rated 4 out of 5 by from Helps improve the vibes...This product helps to keep your transducer's efforts in the furniture and off the floor. I would recommend putting furniture "sliders" under these after installation so that you don't risk tearing them when moving your furniture (couch in my case) around.
Date published: 2009-05-11

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Clark Synthesis TI-100 Round Natural Rubber Foot

How many isolation feet come in a pack? Is it only just one foot per pack?

Asked by: Mbwun
These feet are sold individually.
Answered by: MattP
Date published: 2014-07-17

Proper installation

Can someone post pictures of how they installed these. I just want to make sure im doing right.
Asked by: Nostilja
ok...i've used these, but it was awhile back...if i remember correctly it was a matter of selecting an appropriate pan head or lag screw, then matching up a washer to distribute the load into the pocket ( i can't remember if hardware came with it, but i am certain, if so, i opted not to use it )....then, of course, measuring for placement with a little lee for squish...that's about it.
Answered by: rulgert
Date published: 2014-07-17

Customer Projects

Customer projects that include: Clark Synthesis TI-100 Round Natural Rubber Foot

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1