Channel Vision CVT-15WB 15 dB RF Amplifier 1-In 1-Out
Channel Vision CVT-15WB 15 dB RF Amplifier 1-In 1-Out is rated out of 5 by 1.
Rated 5 out of 5
from The Only Amplifier that Works with FiOSSince the Verizon FiOS service uses frequencies above 1Ghz to transmit the channel guide and to enable the on-demand service, you need a wide-band amplifier. Based on the research that I did, this is the ONLY amplifier available that will work with FiOS. I tried others and always ended up with no channel guide and no on-demand service. The Channel Vision amp was the answer for me since it not only enabled me to once again view several channels that were not available due to a low signal level and it did not interfere with the transmission of the channel guide or the on-demand service. But, do not install this amp in such a way that will result in amplifying the signal back to your router. It will "overload" the router and cause your MoCA service to become offline which, in turn, will require a call to Verizon tech support and a reset of your ONT. [I found this out the hard way.] You should only amplify the signal to your set top box.
Date published: 2014-04-04