CAIG CircuitWriter CW100P Pen 7 ml

CAIG CircuitWriter CW100P Pen 7 ml

Brand:| Model: CW100P
Overview
Draw traces on circuit boards, repair defective traces, make jumpers, shield electronics, design prototype circuits and repair rear-window heater traces.
Part # 
341-236
Weight: 0.125 lbs.  
IN STOCK
List Price$26.95
You Save25%
Your Price
$19.98
Buy 12-up$19.25
Part # 341-236
Qty:  EA
Available Payment Methods

Product Details

CAIG CircuitWriter CW100P Pen 7 ml
The CircuitWriter Pen is a highly conductive polymer for use on a variety of applications. Draw traces on circuit boards, repair defective traces, make jumpers, shield electronics, design prototype circuits and repair rear-window heater traces.


CAIG CircuitWriter CW100P Pen 7 ml
  • BrandCAIG Laboratories
  • ModelCW100P
  • Part Number341-236
  • UPC697429014000
  • Product CategoryPC Boards, Etching & Standoffs
  • Unit of MeasureEA
  • Product Rating
    (6 Reviews)
  • Weight0.125 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the CAIG CircuitWriter CW100P Pen 7 ml
in the PC Boards, Etching & Standoffs product category.

Reviews

CAIG CircuitWriter CW100P Pen 7 ml
CAIG CircuitWriter CW100P Pen 7 ml is rated 4.3333 out of 5 by 6.
Rated 5 out of 5 by from Great stuff.Great product works as advertised. Used it to revive my old remote for my receiver.
Date published: 2014-08-31
Rated 4 out of 5 by from Great BuyWorked great repairing corroded circuit ribbon.
Date published: 2009-10-12
Rated 5 out of 5 by from Great DIY fix for electronic itemsThis product has been extremely useful to me several times to repair internal electronics connections in everything from an alarm clock to my computer. If you are a DIY type of person for fixing your electronics, this is a must have item.
Date published: 2009-02-23
Rated 4 out of 5 by from effective and true to how it was advertisedbought this specifically to repair a flex circuit on an oven control panel. Still need to determine whether the repair will last, but initial indications are that I avoided a $430 replacement part expense by using this pen. Work piece preparation is critical as is a little practice to control the flow from the tip.
Date published: 2009-02-02
Rated 4 out of 5 by from Works as advertisedUsed it to fix a broken trace in an amplifier power supply. Worked perfectly.
Date published: 2008-05-13
Rated 4 out of 5 by from Do the jobUsed it to fix power traces on my xbox, did the job as advertised. Be careful not to press too much as ink will run like water, tho it's easy to clean before it gets solid. Conductivity is great.
Date published: 2008-01-31

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
CAIG CircuitWriter CW100P Pen 7 ml

can this be used for cross-overs for jumpers?

Asked by: spkrs
Yes you can.-Product Description (Circuit Writer Data Sheet)Precision Conductive Ink. Apply instant traces on most surfaces (epoxy, glass, plastic, metal).Draw traces on circuit boards, repair defective traces, make jumpers and shield electronics, design prototype circuits and repair rear-window heater traces.-SpecificationsColor: SilverBinder: AcrylicSolids content by weight: 51.5%Density: 14.1 lbs/galElectrical Resistance: < 0.017 ohm/sq/milShielding Performance: 76 dBViscosity: 20-25 sec., #2 Zahn Cup @ 25 oCIdeal Film Thickness: Between 0.4 and 1.0 milsTheoretical Coverage: 340 Sq ft/gal @ 1 milVOC Content: 0.50 lbs/galSoldering: After heat curing only. Use low temperature soldering (less than 350oF) for not more than 5 seconds. Use low temperature soldering iron.Shelf Life: If stored in dry cool space, 12 months after first use, 24 months if unopened.
Answered by: JDoyner
Date published: 2013-02-20

Is the material the pen puts down silver based?

I need to repair a broken trace in my EMIT ribbon tweeter and have been told to use a silver conductive pen.
Asked by: dibbs
Yes it is. The conductive polymer mentioned is a mixture of silver and acrylic solids as a binder.
Answered by: Dave W
Date published: 2013-01-12

Customer Projects

Customer projects that include: CAIG CircuitWriter CW100P Pen 7 ml

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1