Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email firstname.lastname@example.org
for a prompt reply.
Cable Pants 11mm 2-Conductor Black 10 Pcs.
Part # 082-782 If had two 12 gauge wires, 3.5 to 4.0 mm dia, put together, would they fit in the 4.8 mm cable pants? Remember, I have 4 conductor cable that I am combining into two speaker leads..
If each conductor is 3.5-4mm in diameter they will probably not fit in a jacket that is only 4.8mm.
Date published: 2014-02-05
Part # 082-782 What dimension does 11mm refer to?
This is the ID of the large conductor opening.
Date published: 2013-11-18
Wire gauge ?
The cable pants are X mm, but cables come in X AWG. What are the corresponding sizes? For example, which ones do I need for 12 AWG cable?
Wire gauge is unfortunately tough to equate to a specific size because the number of strands it has and jacketing differences can make for very different sizes. In a general sense though a 12 gauge wire will be a little over 2mm for just the wire. Then you would add in the jacket to determine the size.
Date published: 2013-08-19
do u have heat shrink pants?
and what size do i need foe 16 gauge 2 conductor black wire?
Unfortunately we do not have heat shrinkable pants.You will have to measure the diameter of the cable to verify the size you will need, the diameter of the cable jacket is the determining factor, not gauge size.
Date published: 2012-11-14
Are these heatshrink type ?
The pants themselves are not heatshrink, but we do recommend heatshrink to facilitate the application of the product to your cables.
Date published: 2011-11-21