Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email firstname.lastname@example.org
for a prompt reply.
BOSS D10F Phantom 10" Flat Subwoofer
I have a Dayton Audio SD215-88 8" Shielded DVC Subwoofer (295-480) paired with a Dayton Audio SD215-PR 8" Passive Radiator (295-492) in a 2.16 cubic foot enclosure. The sub doesn't handle much power. Will this work as a replacement for the 295-480?
Please contact our tech support for more help with this question, email@example.com or 800-338-0531 x1.
Date published: 2015-09-01
any suggestions for a bandpass enclosure for these subs?
This will work reasonably well in a bandpass enclosure, although the volumes are pretty large. The sealed chamber needs to be 2.6 cubic feet and the vented chamber needs to be 0.75, with a 3" diameter, 6" long vent. This will provide response from ~33 Hz to 90 Hz.
Date published: 2015-02-21
hello,i want to build a sub box to fit under my seat but I don't think I could manage a 1.9 cuft box,how would this work for say a .50 cuft box stuffed to the max.
The 1.9 volume is considered "ideal" even though it will work fine in smaller volumes. A heavily stuffed 0.5 cubic foot enclosure will still work well, especially in a vehicle application.
Date published: 2015-09-03
Bass box says these work in a ported box.....what should I expect before building a ported box for 2 of them. Is it worth the effort?
A ported box will have a big peak around 60 Hz which could cause a muddy tone. I would recommend sticking with a sealed design for these.
Date published: 2014-08-01
Will this work well as a free-air speaker? I am looking for a 10" free air. Speaker mouted in back seat (pull down console) with free-air in trunk.
Should be okay in that use, but you'll have to limit the power going to it. It won't pound as hard as it would in a smaller sealed enclosure, but you will get smoother, more extended bass than you would with a small box.(This recommendation is based on a quick simulation using the few parameters that Boss publishes; I haven't even seen one of these in person.)
Date published: 2012-05-09
What size sealed enclosure
I am looking to install this in a sealed enclosure with a volume of approximately 0.4 cu. ft. of space. I am not looking for truck shaking sound, but rather just a speaker to round our the factory equipment. Will this sub function at the level I'm looking for in a box of that size?
Most car audio subwoofers work well in small sealed enclosures. I would expect this subwoofer to do the same.
Date published: 2015-09-03